Evaluasi Implementasi Sistem Manajemen Keselamatan Konstruksi (SMKK) pada Pembangunan Gedung Kuliah FT (B, C, dan D) Universitas XYZ Evaluation of the Implementation of the Construction Safety Management System (SMKK) in the Construction of FT Lecture Buildings (B, C, and D) at Universitas XYZ
Main Article Content
Abstract
The implementation of the Construction Safety Management System (SMKK) in construction projects is an important aspect for ensuring worker safety, environmental protection, and work continuity. This study aimed to analyze the level of SMKK implementation, evaluate its compliance with Minister of Public Works and Housing Regulation No. 10 of 2021, and identify supporting and inhibiting factors in its implementation in the construction project of the Faculty of Engineering Lecture Buildings (B, C, and D) at XYZ University. This study used a mixed-methods approach with an evaluative descriptive design, involving 22 respondents selected through purposive sampling and total sampling techniques. Data were collected through questionnaires, interviews, observation, and documentation, and were then analyzed using descriptive statistics, data triangulation, member checking, and gap analysis. The results showed that the level of SMKK implementation was in the appropriate category, with an average score of 89.68%. The compliance evaluation showed that all main elements of SMKK had met regulatory provisions and did not show any significant gap with actual conditions in the field. Supporting factors in SMKK implementation included leadership commitment, availability of resources, workforce competence, and structured safety documentation, whereas inhibiting factors included consistency in procedure implementation and discipline in the use of personal protective equipment. The conclusion of this study confirms that the implementation of SMKK in construction projects requires continuous supervision, safety training, and strengthening of safety culture to support the sustainability of an occupational safety system that complies with regulatory provisions.

Citation Metrics:
Downloads
Article Details

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
References
Alfiyah, C. Q., Pulih Asih, A. Y., Afridah, W., & Zakkiy Fasya, A. H. (2023). Analisis Risiko Kecelakaan Kerja dengan Metode Failure Mode and Effect Analysis pada Pekerja Proyek Kontruksi: Literature Review. Jurnal Ilmu Psikologi dan Kesehatan (SIKONTAN), 1(4), 283–290. https://doi.org/10.47353/sikontan.v1i4.715
Ali, R. F., Fachrin, S. A., & Alwi, M. K. (2023). Analisis Penerapan Komunikasi K3 terhadap Kecelakaan Kerja pada Pekerja di Bagian Produksi dan Pergudangan PT Japfa Comfeed Tbk Unit Makassar. Window of Public Health Journal, 4(6), 1007–1014. https://doi.org/10.33096/woph.v4i6.1615
Badaruddin, S., Nabi, A., Trisnawathy, T., Farid, N. A., & Zaid, S. M. (2023). Penerapan Sistem Manajemen Keselamatan Konstruksi pada Proyek Renovasi Gedung Kelas Internasional Fakultas Kedokteran Universitas Hasanuddin. Journal of Applied Civil and Environmental Engineering, 3(2), 42–53. https://doi.org/10.31963/jacee.v3i2.4620
Hardiansyah, M. A., Sumarja, F. X., Ridlwan, Z., Sunaryo, & Budiyono. (2025). Prinsip Keadilan dan Kepastian Hukum dalam Penentuan Tingkat Risiko Usaha dan Pemberian Sanksi Administratif di Provinsi Lampung. Viva Themis: Jurnal Ilmu Hukum dan Humaniora, 8(2), 425–442. https://jurnal.saburai.id/index.php/THS/article/view/4409
Idaman, R. P., Jufriyanto, M., & Priyana, E. D. (2026). Evaluasi Risiko Kecelakaan Kerja Menggunakan Metode HIRARC dan JSA pada Proyek Konstruksi Industri Kimia: Studi Kasus PT Sika Indonesia. Jurnal Teknologi dan Manajemen Industri Terapan, 5(1), 141–153. https://jurnal-tmit.com/index.php/home/article/view/1478
Miftahuldzanah, W. N., & Hidayat, W. (2024). Implementasi Manajemen Risiko dalam Peningkatan Efektivitas Pembelajaran di SMKN 4 Bandung. ASCENT: Al-Bahjah Journal of Islamic Education Management, 2(2), 93–104. https://doi.org/10.61553/ascent.v2i2.353
Nabil, H. (2023). Analisis Anggaran Biaya Pelaksanaan Sistem Manajemen Keselamatan Konstruksi (SMKK) pada Proyek Pembangunan Gedung: Studi Kasus Proyek Pembangunan Gudang Farmasi dan Instalasi Gizi RSUD Kota Yogyakarta [Undergraduate thesis, Universitas Islam Indonesia]. https://dspace.uii.ac.id/handle/123456789/47379
Noviandini, S., Ekawati, & Kurniawan, B. (2017). Analisis Komitmen Pimpinan terhadap Penerapan Sistem Manajemen K3 (SMK3) di PT Krakatau Steel (Persero) Tbk. Jurnal Kesehatan Masyarakat, 3(3), 639–650. https://ejournal3.undip.ac.id/index.php/jkm/article/view/12631
Paradiang, M. W. (2025). Studi Awal Penerapan Prinsip Manajemen Konstruksi Berkelanjutan pada Proyek-Proyek Infrastruktur Daerah. Inventa: Journal of Science, Technology, and Innovation, 1(2), 371–380. https://scriptaintelektual.com/inventa/article/view/667
Paramita, T., & Drajad, K. (2024). Pengaruh Penerapan Sistem Manajemen Keselamatan Konstruksi (SMKK) terhadap Perilaku Pekerja. Construction and Material Journal, 6(2), 125–136. https://doi.org/10.32722/cmj.v6i2.6055
Putra, I. B. D., Bintana, I. B. P., Intara, I. W., & Pramana, I. M. W. (2022). Analisis Komponen Biaya SMKK Menurut Permen PUPR Nomor 10 Tahun 2021: Studi Kasus Pembangunan Ruang Perawatan Wing Utara Tahap 1 RSU Payangan. Repositori Politeknik Negeri Bali. https://repository.pnb.ac.id/2643/
Putra, I. K. A. A., & Dharma, I. G. B. A. S. (2023). Implementasi Sistem Manajemen Keselamatan dan Kesehatan Kerja (SMK3) pada Pekerjaan Proyek Pembangunan Infrastruktur. Jurnal Ilmiah Kurva Teknik, 12(1), 103–111. https://doi.org/10.36733/jikt.v12i1.6557
Rahman, N. A., Sartika, & Sani, A. (2025). Faktor yang Berpengaruh terhadap Kecelakaan Kerja pada Operator Truk di Terminal Petikemas New Makassar. Window of Public Health Journal, 6(3), 474–482. https://doi.org/10.33096/sxrkwt28
Ratry, R. (2021). Tanggung Jawab Pengusaha dan Pekerja dalam Penerapan K3 pada Proyek Konstruksi Ditinjau dari Pelaksanaan Hak dan Kewajiban Para Pihak. Dharmasisya: Jurnal Program Magister Hukum FHUI, 1(2), 997–1006. https://scholarhub.ui.ac.id/dharmasisya/vol1/iss2/32
Rizki, A. A. (2025). Kajian Hukum Terkait Kepastian Hukum dalam Peraturan Pemerintah Republik Indonesia Nomor 28 Tahun 2025 tentang Penyelenggaraan Perizinan Berusaha Berbasis Risiko untuk Menunjang Pertumbuhan Investasi Asing di Indonesia. Jurnal Multidisiplin Indonesia, 4(10), 572–580. https://doi.org/10.58344/jmi.v4i10.2441
Sudarni, A. A. C., Sari, R. N., Hayati, K. R., Tranggono, & Solehah, F. (2023). Analisis Dampak Program Kesehatan dan Keselamatan Kerja (K3) terhadap Penurunan Kecelakaan Kerja di Industri Konstruksi. Prosiding Seminar Nasional Waluyo Jatmiko, 16(1), 331–340. https://doi.org/10.33005/wj.v16i1.40
Widiyanti, O. P., Anggitasari, I., Kusuma, O. P. U., & Susilowati. (2025). Penerapan Sistem Manajemen Keselamatan Konstruksi (SMKK) Studi Kasus Proyek PT Aroma Footwear Indonesia 3. JIMU: Jurnal Ilmiah Multidisipliner, 4(1), 1632–1641. https://ojs.smkmerahputih.com/index.php/jimu/article/view/1592














