Analisis Penerapan Prosedur Persiapan Ruang Muat di MV. Manalagi Asta Analysis of the Implementation of Cargo Hold Preparation Procedures on MV. Manalagi Asta
Main Article Content
Abstract
Cargo hold preparation is an important stage in bulk carrier operations because hold cleanliness, equipment readiness, and crew compliance with Standard Operating Procedures (SOPs) determine loading readiness and the smooth operation of the vessel. This study aims to analyze the implementation of cargo hold preparation procedures on MV Manalagi Asta, identify the factors causing their suboptimal implementation, and formulate corrective actions to support loading readiness. This study employed a qualitative approach with a descriptive method. Primary data were obtained through direct observation during sea practice and interviews with the Chief Officer, boatswain, and deck crew, while secondary data were derived from ship documents, operational records, visual documentation, books, and relevant scientific literature. The data were analyzed through the stages of reduction, presentation, and conclusion drawing. The results showed that cargo hold preparation had not been implemented optimally, as indicated by the presence of previous cargo residues in the holds and bilge wells and inadequate maintenance of several hatch cover components. Work implementation was constrained by limited time, an imbalance between the number of deck personnel and the size of the work area, inadequate cleaning equipment, delays in equipment procurement, inconsistent supervision, and incomplete implementation of SOPs. These conditions reduced the thoroughness of the cleaning process, resulting in cargo holds that did not meet cleanliness standards. Corrective actions included conducting a safety meeting before work commenced, systematically preparing a work plan, clearly assigning responsibilities, strengthening phased inspections by the Chief Officer, implementing preventive maintenance, providing adequate cleaning equipment, and conducting final verification using a cargo hold preparation checklist. This study concludes that cargo hold preparation needs to be managed as a loading-readiness control system that integrates procedures, personnel, equipment, supervision, occupational safety, and documentation. These findings can provide a practical basis for shipping companies and ship crews to improve the effectiveness of cargo hold preparation and minimize the risks of loading delays and rejection.
Downloads
Citation Metrics & Similar Scopus Articles
-
Couto M. (2026)Exploiting topic analysis models to explore psychological dimensions in social media dataScientific Reports, 16(1)
-
Ricaldi Echevarria M.L. (2026)Educational inequalities in academic performance in secondary education in Peru: a multilevel analysisPraxis Educativa, 21
-
García Sarria J.J. (2026)The gap in scientific production between Andean countries: A longitudinal analysis of publications in Scopus (2000-2024)Iberoamerican Journal of Science Measurement and Communication, 6(1)
Article Details

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
References
Antarsyah, M. F., Rusman, R., Syam, M. H., Ansar, A. A., & Frastika, Y. (2025). Optimalisasi Pembersihan Ruang Palka guna Mencegah Keterlambatan saat Memuat pada MV. Golden Destiny. Journal of Maritime Studies and Management, 1(2), 33–42. https://jurnal.poltekpelsulut.ac.id/index.php/jmsm/article/view/127
Baumler, R., Bhatia, B. S., & Kitada, M. (2021). Ship first: Seafarers’ adjustment of records on work and rest hours. Marine Policy, 130, 104186. https://doi.org/10.1016/j.marpol.2020.104186
Bergheim, K., Nielsen, M. B., Mearns, K., & Eid, J. (2015). The relationship between psychological capital, job satisfaction, and safety perceptions in the maritime industry. Safety Science, 74, 27–36. https://doi.org/10.1016/j.ssci.2014.11.024
Dirgantoro, A. R., Purnama, C., & Lumban Batu, P. N. (2025). Cargo hold failure in meeting the hospital clean standard after discharging dirty cargo and before loading grain cargo on board MV Bel Air. Jurnal Cakrawala Bahari, 8(2), 1–12. https://doi.org/10.70031/jkb.v8i2.124
Grech, M. R. (2016). Fatigue risk management: A maritime framework. International Journal of Environmental Research and Public Health, 13(2), 175. https://doi.org/10.3390/ijerph13020175
Håvold, J. I. (2010). Safety culture and safety management aboard tankers. Reliability Engineering & System Safety, 95(5), 511–519. https://doi.org/10.1016/j.ress.2010.01.002
International Labour Organization. (2006). Maritime Labour Convention, 2006, as amended. https://www.ilo.org/international-labour-standards/maritime-labour-convention-2006
International Maritime Organization. (1997). Guidance to ships’ crews and terminal personnel for bulk carrier inspections (Resolution A.866(20)). https://wwwcdn.imo.org/localresources/en/KnowledgeCentre/IndexofIMOResolutions/AssemblyDocuments/A.866%2820%29.pdf
International Maritime Organization. (2019). COLREG: Convention on the International Regulations for Preventing Collisions at Sea.
International Maritime Organization. (2022). Amendments to the International Maritime Solid Bulk Cargoes (IMSBC) Code (Resolution MSC.500(105)). https://wwwcdn.imo.org/localresources/en/KnowledgeCentre/IndexofIMOResolutions/MSCResolutions/MSC.500%28105%29.pdf
Lestari, E., Rachman, S., & Rais, A. A. (2021). Persiapan Ruang Muat pada Kapal Curah guna Menunjang Keberhasilan dalam Proses Pemuatan di MV. C. Utopia. Jurnal Venus, 9(2), 26–34. https://doi.org/10.48192/vns.v9i02.440
Liu, Q., Ma, Y., & Yang, L. (2025). Task allocation considering shipping safety: Workload resilient interval for inland passenger ship seafarers’ optimal safety performance in real navigation. Regional Studies in Marine Science, 81, 103927. https://doi.org/10.1016/j.rsma.2024.103927
Muhammad, A. A. A. (2024). Optimalisasi Pembersihan Ruang Palka guna Mencegah Keterlambatan saat Memuat pada Kapal MV Ultra Cory [Diploma thesis, Politeknik Ilmu Pelayaran Semarang]. https://repository.pip-semarang.ac.id/5515/
Nævestad, T.-O., Phillips, R. O., Størkersen, K. V., Laiou, A., & Yannis, G. (2019). Safety culture in maritime transport in Norway and Greece: Exploring national, sectorial and organizational influences on unsafe behaviours and work accidents. Marine Policy, 99, 1–13. https://doi.org/10.1016/j.marpol.2018.10.001
Panjaitan, E. M., Setiawan, H., & Pongoh, F. M. (2024). Analisis Prosedur Pembersihan Ruang Muat (Tank Cleaning) di Kapal SPOB Seroja II. Journal of Nautical Science and Technology, 1(1), 31–37. https://jurnal.poltekpelsulut.ac.id/index.php/Nautical/article/view/95
Ponganan, D. K., Widarbowo, D., & Allolayuk, A. (2020). Optimalisasi Persiapan Ruang Muat pada Musim Dingin di MV. JK Pioneer. Jurnal Venus, 8(2), 1–20. https://doi.org/10.48192/vns.v8i2.281
Sugiyono. (2017). Metode Penelitian Kuantitatif, Kualitatif, dan R&D. Alfabeta.
Sugiyono. (2022). Metode Penelitian Kualitatif. Alfabeta.
Wahyudi, I. K. A. (2025). Persiapan Ruang Muat pada Kapal KM Maju 18 guna Menunjang Keberhasilan Proses Pemuatan. Jurnal 7 Samudra, 10(1), 9–16. https://doi.org/10.54992/7samudra.v10i1.195
Yen, C.-D., Hsu, S.-W., Ye, K.-D., Shang, K.-C., & Wu, C.-H. (2024). A safety compliance model for container terminal operations: The roles of the safety climate, non-compliance cost and safety self-efficacy. Maritime Policy & Management, 51(1), 118–132. https://doi.org/10.1080/03088839.2022.2089754






















