Rancang Bangun Automatic Weighing System untuk Aplikasi Mesin Mixer Design and Development of an Automatic Weighing System for Mixer Machine Applications
Article Sidebar
Page Numbers:
1006-1019
Digital Object Identifier:
10.58578/yasin.v5i2.5007
Viewed: 335 times
Downloaded: 233 times
LYAS Publisher cordially invites qualified professionals to serve as Editors or Reviewers. Your expertise will make an important contribution to maintaining and strengthening the academic quality of our publications. Interested applicants are kindly requested to complete the application form at the following link: Editors & Reviewers
Please feel free to contact us if you need any further information about the submission process or if you have any additional questions.
Authors:Akhmad Tito Fismatika1*, Aris Sandi2, Martin Andre Setyawan3, Farhan As'ari4, Wahyu Kurniawan5
Copyright :Authors retain copyright and grant the journal right of first publication.
Main Article Content
Google Scholar
Abstract
The greater human need for livestock continues to increase along with increasing population growth. Therefore, optimization is needed in the livestock processing process, while some livestock equipment today is still classified as conventional, which still uses human power and is manual in nature, for example the animal feeding system. With the development of technology that can be applied to the shutter, it is necessary to optimize animal feeding systems such as automatic weighing systems. The automatic weighing system is one of the innovations that supports the performance of a mixing tool (mixer) which is designed to mix unused plantation industry waste such as sugar cane shoots, palm fronds, bagasse, palm oil meal, etc. in the animal feeding system. This research begins with a search for related literature, followed by making a tool design which then based on the design that has been made this tool can be realized accompanied by testing whether this tool is in accordance with the desired specifications. The progress of this research is in the stage of making schematic wiring diagrams for making printed circuit board (PCB) lines. Next, all electronic components used on the bread board are transferred to the PCB and then PCB prototyping testing is carried out to analyze wiring path errors on the PCB. The next stage is to apply a load to the load cell to ensure the correctness of the program/coding that has been created and the accuracy of the reading results for the given load. Based on the tests that have been carried out, the measurement results are still within tolerance so that this Automatic Weighing System tool is suitable for use. As a final stage, a mechanical system will be created to apply an automatic weighing system that uses this load cell on each leg of the mixer machine.
Downloads
Citation Metrics & Similar Scopus Articles
-
Najafi E. (2027)Analyzing the process of dynamic and tense discourse systems in the poem "katibeh" of Akhavan salesLanguage Related Research, 17(4), 263-291
-
Afrouz M. (2027)Automatic Detection of Grammatical Errors in English Translations: Assessing the Efficacy and Suggesting Some Recommendations for Boosting Grammarly SoftwareLanguage Related Research, 17(4), 1-33
-
Aimenov Z.T. (2027)Artificial graphite from Shubarkol coal obtained by sublimation of carbon atoms into the gas phase followed by desublimation into high-purity graphiteKompleksnoe Ispolzovanie Mineralnogo Syra, 341(2), 27-35
Article Details
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
References
Adinata, K. I., Sunarso, & Sumekar, W. (2016). Potensi Komoditas Ternak Sapi Potong dan Daya Dukung Limbah Tanaman Padi di Kabupaten Sukoharjo. Buana Sains, 16(2), 111–120. https://doi.org/10.33366/bs.v16i2.416
Afrianto, R. B. (2020). Timbangan Digital Otomatis Berbasis Mikrokontroler Arduino Uno. Jurusan Teknik Elektro, Fakultas Teknik, Universitas Muhammadiyah Surakarta, 19. https://eprints.ums.ac.id/81965/1/Naskah Publikasi.pdf
Ali, U., Ir. Ari, Wibowo S.T., M.Eng., I., Ir. Muhammad, Mustangin, S.T., M. E., & Yunaidi, Yunaidi, S.T., M. E. (2022). RANCANG BANGUN ROTARY MIXER UNTUK PROSES PRODUKSI PUPUK ORGANIK DARI LIMBAH PABRIK GULA STUDI KASUS ANALISIS BEBAN. Politeknik LPP. https://repository.polteklpp.ac.id/id/eprint/3353/
Cipta, A., Rukmana, I., & Ro’uf, A. (2014). Aplikasi Sensor Load Cell pada Purwarupa Sistem Sortir Barang. Ijeis, 4(1), 35–44. https://jurnal.ugm.ac.id/ijeis/article/viewFile/4220/3474
Dhanneswara Yoga, W. K., & Farida, A. (2020). Sistem pencatatan hasil timbangan menggunakan sensor. Jurnal Jartel, 10(1), 13–19. http://dx.doi.org/10.33795/jartel.v10i1.161
Elly, F. H., Waleleng, P. O. V, Lumenta, I. D. R., & Oroh, F. N. S. (2013). Introduksi Hijauan Makanan Ternak Sapi Di Minahasa Selatan Introduction of Forage of Cattle in South Minahasa. Jurnal Pastura, 3(1), 5–8. https://doi.org/10.24843/Pastura.2013.v03.i01.p02
Ginting, R. B., & Ritonga, M. Z. (2018). Studi Manajemen Produksi Usaha Peternakan Kambing di Desa Deli Tua Kecamatan Namorambe Kabupaten Deli Serdang Sumatera Utara. Agroveteriner, 6(2), 94. https://journal.unair.ac.id/download-fullpapers-agrovetce5db95f60full.pdf
Hermawansa, H., Susanto, A., & Indrevaleco, B. (2018). Perancangan dan Pembuatan Mesin Perontok Padi Berbasis Mikrokontroler ATMega32. JURNAL MEDIA INFOTAMA, 13. https://doi.org/10.37676/jmi.v13i1.433
Jauhari Arifin, Hermawansyah, & Natalia, Z. L. (2016). Perancangan murrotal otomatis menggunakan mikrokontroller arduino mega 2560. Jurnal Media Infotama, 12(1), 89. https://doi.org/10.37676/jmi.v12i1.276
Kusriyanto, M., & Saputra, A. (2016). Rancang Bangun Timbangan Digital Terintegrasi Informasi BMI (Medilla Kusriyanto dkk). Teknoin, 22(4), 269–275.
Magga, R. (2011). Penggunaan Strain Gage ( Load Cell ) Untuk Analisa. Jurnal Mekanikal, 2(1), 53–61. https://download.garuda.kemdikbud.go.id/article.php?article=1327322&val=762&title=PENGGUNAAN STRAIN GAGE LOAD CELL UNTUK ANALISA TEGANGAN PADA PEMBEBANAN STATIK BATANG ALUMINIUM
Manege, M. N. P., K. Allo, E., & Bahrun. (2017). Rancang Bangun Timbangan Digital Dengan Kapasitas 20Kg Berbasis Microcontroller ATMega8535. E-Journal Teknik Elektro Dan Komputer, 6(1), 57–62. https://doi.org/10.35793/jtek.6.1.2017.16123
Rivai, A., & Azmi, Z. (2021). Implementasi Metode Fuzzy Logic Pada Alat Pemeras Sari Kunyit Berbasis Arduino. x, 1–10. https://doi.org/10.53513/jct.v2i3.3018
WAHYUDI, W., RAHMAN, A., & NAWAWI, M. (2018). Perbandingan Nilai Ukur Sensor Load Cell pada Alat Penyortir Buah Otomatis terhadap Timbangan Manual. ELKOMIKA: Jurnal Teknik Energi Elektrik, Teknik Telekomunikasi, & Teknik Elektronika, 5(2), 207. https://doi.org/10.26760/elkomika.v5i2.207
Zulfanita, Eny, R., & Utami, D. P. (2011). Pembatasan Ransum Berpengaruh terhadap Pertambahan Bobot Badan Ayam Broiler pada Periode pertumbuhan. Jurnal Ilmu- Ilmu Pertanian, 7(1), 59–67. https://doi.org/10.31942/mediagro.v7i1.567