Pengembangan e-Jobsheet Berbantu Tinkercad Kelas XI pada Mata Pelajaran Sistem Kendali Elektronik di SMK Negeri 4 Pariaman Development of a Tinkercad-Assisted e-Jobsheet for Grade XI in the Electronic Control Systems Subject at SMK Negeri 4 Pariaman
Article Sidebar
Page Numbers:
2119-2132
Digital Object Identifier:
10.58578/tsaqofah.v6i2.8795
Viewed: 225 times
Downloaded: 82 times
LYAS Publisher cordially invites qualified professionals to serve as Editors or Reviewers. Your expertise will make an important contribution to maintaining and strengthening the academic quality of our publications. Interested applicants are kindly requested to complete the application form at the following link: Editors & Reviewers
Please feel free to contact us if you need any further information about the submission process or if you have any additional questions.
Authors:Tifani Putri Arizqa1, Delvi Asmara2
Copyright :Authors retain copyright and grant the journal right of first publication.
Main Article Content
Abstract
This study was motivated by the limited availability of practical learning media and the low level of student engagement in learning Electronic Control Systems at vocational high schools, where the use of conventional media makes it difficult for students to understand application-oriented concepts that require concrete visualization of circuits. The study aimed to develop an E-Jobsheet learning media assisted by Tinkercad for the Electronic Control Systems subject in eleventh-grade classes at SMK Negeri 4 Pariaman to support more interactive and flexible practicum activities. A Research and Development (R&D) method was employed using the 4D model, which comprises the define, design, development, and disseminate stages. The trial subjects consisted of 20 students from class XI Industrial Electronics Engineering. The research instruments included material expert validation sheets, media expert validation sheets, and student practicality questionnaires, while the data were analyzed using quantitative descriptive techniques to determine the feasibility level of the developed learning media. The results showed that the media developed fell into the very valid category, with material expert validation of 83.60% and media expert validation of 83%, as well as a practicality test result of 89.15% in the very practical category. The study concludes that the Tinkercad-assisted E-Jobsheet is suitable for use as practicum learning media and has the potential to enhance students’ interest, engagement, and understanding in learning Electronic Control Systems at vocational high schools.
Citation Metrics:
Downloads
Citation Metrics & Similar Scopus Articles
-
Kojima H. (2027)Clinical Utility and Safety of a Novel Ultraslim Catheter-Type Peroral Cholangioscope/Pancreatoscope: A Single-Center Case SeriesDen Open, 7(1)
-
Xu W. (2027)Endoscopic Thrombin Injection for Gastric Variceal Bleeding: A Systematic Review and Meta-Analysis of Observational and Trial DataDen Open, 7(1)
-
Lee H. (2027)Low-Temperature All-Solid-State BatteriesNano Micro Letters, 19(1)
Article Details
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
References
Asbendri, B. L., Anori, S., Dewi, I. P., & Efrizon. (2024). Exploring the impact of Tinkercad-assisted learning on student performance in industrial electronics subject. Journal of Hypermedia & Technology-Enhanced Learning (J-HyTEL), 2(2), 123–136. https://doi.org/10.58536/j-hytel.v2i2.124
Ash Shiddiqy, I., & Suputra, I. N. (2022). Keberhasilan Keberhasilan Penggunaan Media Pembelajaran Interaktif Berbantuan Software Lectora Inspire dalam Meningkatkan Hasil Belajar Siswa. Jurnal Pendidikan Administrasi Perkantoran (JPAP), 10(1), 94–106. https://journal.unesa.ac.id/index.php/jpap/article/view/17479
Badruttamam, M., & Hadromi, H. (2021). Development of Android-based interactive jobsheet on electrical measuring equipment materials in vocational school. Journal of Educational Research and Evaluation, 10(1). https://doi.org/10.15294/jere.v10i1.50048
Diana, O., Putri, N. S., Islamiah, F., Andini, T., & Marini, A. (2022). Analisis Pengaruh Pembelajaran Menggunakan Media Interaktif Terhadap Hasil Belajar Siswa Sekolah Dasar. JPDSH: Jurnal Pendidikan Dasar dan Sosial Humaniora, 2(2). https://bajangjournal.com/index.php/JPDSH/article/view/4290/3028
Febrianti, E., Wahyuningtyas, N., & Ratnawati, N. (2021). Pengembangan Multimedia Interaktif “SCRIBER” untuk Peserta Didik Sekolah Menengah Pertama. Edukasi: Jurnal Pendidikan, 19(2), 275. https://journal.upgripnk.ac.id/index.php/JP/article/view/3005
Gustina Sari, S., Rahmayuni Jusar, I., & Wahyuni, S. (2024). Pengembangan Media Interaktif Berbasis Contextual Teaching and Learning pada Materi Bangun Datar Kelas IV Sekolah Dasar. Jurnal Pemikiran dan Pengembangan Sekolah Dasar, 12(1), 14–27. https://ejournal.umm.ac.id/index.php/jp2sd/article/view/28312/14419
Hakim, M. I., Prihantoro, C. R., & Dwiyati, S. T. (2025). Pengembangan Media Pembelajaran Berbasis E-Jobsheet pada Mata Pelajaran Gambar Teknik Kelas X di SMKS. Jurnal Pendidikan Teknik Mesin Undiksha, 13(1), 30–37.
Mailani, O., Nuraeni, I., Syakila, S. A., Lazuardi, J., & Komunikasi, P. I. (2022). Bahasa Sebagai Alat Komunikasi dalam Kehidupan Manusia.
Malik, M., Burhanuddin, A., & Mukhtar, A. (2024). Sistem Smart Home Berbasis Arduino dengan Simulasi Tinkercad. NISIN: Jurnal Teknik Mesin Universitas PGRI Semarang. http://journal.upgris.ac.id/index.php/nisin/article/view/7658/3265
Mokalu, V. R., Panjaitan, J. K., Boiliu, N. I., & Rantung, D. A. (2022). Hubungan Teori Belajar dan Teknologi Pendidikan. Edukatif: Jurnal Ilmu Pendidikan, 4(1), 1475–1486. https://edukatif.org/index.php/edukatif/article/view/2192/pdf
Mohapatra, B. N., Mohapatra, R. K., Jagdhane, V., Ajay, C. A., Sherkar, S. S., & Phadtare, V. S. (2020). Smart performance of virtual simulation experiments through Arduino Tinkercad circuits. Perspectives in Communication, Embedded-Systems and Signal-Processing (PiCES)-An International Journal, 4(7), 157–160. https://doi.org/10.5281/zenodo.4249073
Pratama, R. A., & Permana, I. (2021). Simulasi Permodelan Menggunakan Sensor Suhu Berbasis Arduino. Edu Elektrika Journal, 10(1).
Putra Irman, W., Syah, N., & Giatman, M. (2022). Pengembangan Media Pembelajaran E-Jobsheet Praktek Rekayasa Plumbing dan Sanitasi. CIVED, 9(2).
Rahayu, R., Rosita, R., Rahayuningsih, Y. S., Hernawan, A. H., & Prihantini, P. (2022). Implementasi Kurikulum Merdeka Belajar di Sekolah Penggerak. Jurnal Basicedu, 6(4), 6313–6319. https://jbasic.org/index.php/basicedu/article/view/3237/pdf
Siti Aisyah, Ramadani, A. F., Wulandari, A. E., & Astutik, C. (2025). Pemanfaatan Teknologi Digital sebagai Media Pembelajaran Interaktif untuk Siswa Sekolah Dasar. Jurnal Sadewa: Publikasi Ilmu Pendidikan, Pembelajaran dan Ilmu Sosial, 3(1), 388–401. https://doi.org/10.61132/sadewa.v3i1.1565
Sukatin, L., Nuri, M., Naddir, S. Y., Nur, I., Sari, W., & Indriani, Y. (2022). Teori Belajar dan Strategi Pembelajaran. JOSR: Journal of Social Research, 1(8), 916–921. https://ijsr.internationaljournallabs.com/index.php/ijsr/article/view/187
Wati, J. T. (2024). Pengaruh Kreativitas Guru Terhadap Hasil Belajar Siswa pada Mata Pelajaran IPS di SMP Negeri 7 Metro (Skripsi).
Yuliani, W., & Banjarnahor, N. (2021). Metode Penelitian Pengembangan (R&D) dalam Bimbingan dan Konseling. Quanta: Kajian Bimbingan dan Konseling dalam Pendidikan, 5(3), 111–118. https://doi.org/10.22460/q.v5i3p111-118.3051
Zulfa Izza, A., & Susilawati, S. (2020). Studi Literatur: Problematika Evaluasi Pembelajaran dalam Mencapai Tujuan Pendidikan di Era Merdeka Belajar.