Penerapan PJBL untuk Meningkatkan Hasil Belajar Las SMAW Siswa SMK N 1 Guguak Implementation of PJBL to Improve SMAW Welding Learning Outcomes of Students at SMK N 1 Guguak
Article Sidebar
Page Numbers:
3618-3633
Digital Object Identifier:
10.58578/tsaqofah.v6i4.10866
Viewed: 8 times
Downloaded: 3 times
LYAS Publisher cordially invites qualified professionals to serve as Editors or Reviewers. Your expertise will make an important contribution to maintaining and strengthening the academic quality of our publications. Interested applicants are kindly requested to complete the application form at the following link: Editors & Reviewers
Please feel free to contact us if you need any further information about the submission process or if you have any additional questions.
Authors:
Gusti Geriansyah1*, Jasman Jasman2 
Copyright :
Authors retain copyright and grant the journal right of first publication.
Main Article Content
Abstract
The low learning outcomes of students in the SMAW Welding subject indicate the need to implement a learning model that can increase engagement, understanding, and practical skills in the vocational learning process. This study aims to improve the learning outcomes of eleventh-grade students in Welding, Fabrication, and Metal Engineering at SMK Negeri 1 Guguak through the implementation of the Project Based Learning model. This study used a Classroom Action Research (CAR) method conducted in three cycles, with the stages of planning, action implementation, observation, and reflection. The research subjects consisted of 26 students. Data were collected through knowledge tests, observation, and project assessment of welding skills. The results of the study show that the students’ mean learning outcomes increased from 59.80 in the pre-cycle to 70.95 in Cycle I, 76.47 in Cycle II, and 80.10 in Cycle III. Classical mastery also increased from 30.76% in the pre-cycle to 38.46% in Cycle I, 76.92% in Cycle II, and 88.46% in Cycle III. The conclusion of the study affirms that the implementation of the Project Based Learning model can improve students’ learning outcomes in SMAW Welding, both in terms of knowledge and practical skills. The implications of this study indicate that project-based learning can serve as an effective alternative vocational learning model to strengthen active engagement, conceptual understanding, and practical skills among vocational high school students.
Citation Metrics:
Downloads
Article Details
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
References
Abubakar, G. R. I., & Widiyanti, W. (2026). Mentor-based learning to enhance SMAW welding outcomes in vocational entrepreneurship education. Ideguru: Jurnal Karya Ilmiah Guru, 10(3), 2263–2268. https://doi.org/10.51169/ideguru.v10i3.2164
Arikunto, S. (2001). Prosedur Penelitian: Suatu Pendekatan Praktik. Rineka Cipta.
Arikunto, S. (2006). Prosedur Penelitian: Suatu Pendekatan Praktik (Edisi revisi VI). Rineka Cipta.
Departemen Pendidikan Nasional. (2004). Pedoman Penilaian Hasil Belajar.
Elliott, J. (1991). Action research for educational change. Open University Press.
Enawisnat, E., Ambiyar, A., Jalinus, N., & Waskito, W. (2022). Pengaruh Project Based Learning pada Mata Pelajaran Produk Kreatif dan Kewirausahaan di SMK Negeri 1 Mandau. Aksara: Jurnal Ilmu Pendidikan Nonformal, 8(3), 1785–1794. https://doi.org/10.37905/aksara.8.3.1785-1794.2022
Kementerian Pendidikan dan Kebudayaan. (2014). Panduan Penilaian Hasil Belajar Peserta Didik.
Lesman, I., Mulianti, M., Primawati, P., & Kassymova, G. K. (2023). Implementation of project-based learning (PjBL) model to increase students’ creativity and critical thinking skill in vocational creative product subjects. Jurnal Pendidikan Teknologi Kejuruan, 6(3), 202–215. https://doi.org/10.24036/jptk.v6i3.34023
Saputra, F., & Ambiyar, A. (2025). Pengaruh Model Project Based Learning terhadap Hasil Belajar Siswa Mata Pelajaran Teknologi Pengelasan Logam di SMK Negeri 2 Painan. Mars: Jurnal Teknik Mesin, Industri, Elektro dan Ilmu Komputer, 3(3), 95–108. https://doi.org/10.61132/mars.v3i3.825
Setiyawan, A., Septiyanto, A., Anggoro, A. B., & Asri, S. (2022). Project-based learning (PjBL) for vocational high school teacher candidates. In Proceedings of the 4th Vocational Education International Conference (VEIC 2022) (pp. 12–17). Atlantis Press. https://doi.org/10.2991/978-2-494069-47-3_3
Setyosari, P. (2013). Metode Penelitian Pendidikan dan Pengembangan. Kencana Prenadamedia Group.
Sudarsono, B., Tentama, F., Mulasari, S. A., Sukesi, T. W., Sulistyawati, S., Ghozali, F. A., Yuliansyah, H., Nafiati, L., & Sofyan, H. (2022). Development of Integrated Project-based (PjBL-T) model to improve work readiness of vocational high school students. Jurnal Pendidikan Vokasi, 12(3), 222–235. https://doi.org/10.21831/jpv.v12i3.53158
Sugiyono. (2012). Metode Penelitian Pendidikan: Pendekatan Kuantitatif, Kualitatif, dan R&D. Alfabeta.
Sugiyono. (2018). Metode Penelitian Kuantitatif, Kualitatif, dan R&D. Alfabeta.
Dewangga, A. W., & Ahmad, N. D. (2023). The effect of the project based learning model on improving the competence of practical learning of vocational students: A review. Jurnal Dinamika Vokasional Teknik Mesin, 8(2), 156–167. https://doi.org/10.21831/dinamika.v8i2.66754
Wiriaatmadja, R. (2012). Metode Penelitian Tindakan Kelas: Untuk Meningkatkan Kinerja Guru dan Dosen. Remaja Rosdakarya.