Alat Penghancur Kulit Kayu Manis Berbasis PLC PLC-Based Cinnamon Bark Crusher Machine
Article Sidebar
Page Numbers:
378-398
Digital Object Identifier:
10.58578/masaliq.v5i1.4763
Viewed: 214 times
Downloaded: 165 times
LYAS Publisher cordially invites qualified professionals to serve as Editors or Reviewers. Your expertise will make an important contribution to maintaining and strengthening the academic quality of our publications. Interested applicants are kindly requested to complete the application form at the following link: Editors & Reviewers
Please feel free to contact us if you need any further information about the submission process or if you have any additional questions.
Authors:
Parohon Maruli Tua1 
Copyright :
Authors retain copyright and grant the journal right of first publication.
Main Article Content
Abstract
This study presents the design and development of an automated cinnamon bark shredder control system using a Programmable Logic Controller (PLC). The purpose of the system is to enhance production efficiency by replacing manual processes with automation, thereby reducing time, labor costs, and error rates. The system integrates components such as proximity sensors, induction motors, and PLC Omron CP1E, programmed with the CX-Programmer software. Testing demonstrated that the shredder effectively processes cinnamon bark into fine powder meeting Indonesian National Standards (SNI) for export, with consistent results in particle size (0.7–1 cm) and reduced waste. The tool is suitable for small and medium-sized industries (IKM) due to its cost efficiency, operational simplicity, and ability to improve production capacity. Future developments may focus on scaling up for industrial use.
Downloads
Article Details
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
References
Akbar Lailul Gilang. (2021). Rancang Bangun Alat Wiring Diagram Thrust Reverse Engine System Boeing 737-200 Sebagai Media Pembelajaran Di Politeknik Penerbangan Surabaya. Jurnal Teknologi Penerbangan, 5(2), 93–100.
Alima, S. N., Fauziyah, M., & Dewatama, D. (2020). PI Controller Untuk Mengatur Kecepatan Motor Induksi 1 Fasa. Avitec, 2(2), 161–169. https://doi.org/10.28989/avitec.v2i2.647
Amsier, M., Prasetyo, M. T., & Assaffat, L. (2017). Rancang bangun alat pengatur suhu untuk ruang budidaya jamur tiram berbasis PLC ( Programmable Logic Controller ) OMRON CP1E. 1–8.
Anaam K I, H. T., & Pranata R Y, Abdillah h, P. A. Y. W. (2022). Pengaruh Trend Otomasi Dalam Dunia Manufaktur dan Industri. Vocational Education National Seminar, 1(1), 46–50.
Hariroh, S., & Marzuki, I. (2021). Karakteristik GC-MS Minyak Kayu Manis Asal Pulau Banda. Jurnal Pertanian Kepulauan, 5(2), 82–88. https://doi.org/10.30598/10.30598/jpk.2021.5.2.82
Humaira, F. A., & Rochdiani, D. (2021). Faktor-Faktor Yang Mempengaruhi Volume Ekspor Kayu Manis Indonesia. Mimbar Agribisnis: Jurnal Pemikiran Masyarakat Ilmiah Berwawasan Agribisnis, 7(1), 437. https://doi.org/10.25157/ma.v7i1.4675
Imnadir, I. D. Z. (2022). Penerapan PLC HMI (Human Machine Interface) untuk Monitoring Objek pada Sistem Pengisian Minuman ke Dalam Botol. Buletin Utama Teknik, 18(1), 47–53.
Irfan Fadhlurrohman, Cahya Wulandari, & Muhammad Razan Assaqthi Al-Ryadhi. (2023). Diversifikasi Produk Susu Fermentasi dengan Pemanfaatan Kayu Manis (Cinnamomum burmannii) sebagai Inovasi Pangan Fungsional: Review. Prosiding Seminar Nasional Pembangunan Dan Pendidikan Vokasi Pertanian, 4(1), 363–374. https://doi.org/10.47687/snppvp.v4i1.659
Jabbar, A. A. (2020). Jurnal Fakultas Teknik SISTEM KENDALI LENGAN ROBOT 4 DOF MELALUI PUSH BUTTON DAN BLUETOOTH ( JOYSTICK , TERMINAL , VOICE ). xx(xx), 1–12.
Mappa, A., Rumalutur, S., & Mambrisaw, M. (2020). Sistem Kontrol Konveyor Pemilah Logam Menggunakan Plc Omron Cp1E. Electro Luceat, 6(2), 282–289. https://doi.org/10.32531/jelekn.v6i2.267
Mukaromah, S. A. (2020). EFEKTIVITAS KAYU MANIS (Cinnamomum Burmanii) TERHADAP KADAR GLUKOSA DARAH PADA PENDERITA DIABETES MELITUS: LITERATUR REVIEW (Doctoral dissertation, Universitas Muhammadiyah Semarang).
Pratono, A., & Lubis, S. A. (2023). Rancang Bangun Alat Pengontrolan Motor Dc Pada Alat Produksi Biodiesel Dari Minyak Jelantah Berbasis Arduino Mega. Jurnal Ilmu Teknik, 1(1), 16–24. https://doi.org/XX..XXXXX/TEKTONIK
PT Sumatera Tropical Spices. (2023). *Catatan produksi: Proses produksi produk kulit kayu manis broken * (Dokumen internal). PT. Sumatera Tropical Spices. Sumatera Barat.
Yuhendri, D. (2019). Penggunaan PLC Sebagai Pengontrol Peralatan Building Automatis. JET (Journal of Electrical Technology), 3(3), 121–127. https://jurnal.uisu.ac.id/index.php/jet/article/view/952
Yusro, M., & Diamah, A. (2019). Sensor dan Tranduser. Universitas Negeri Jakarta.