Application of Fishbone and FMEA in Quality Control of Tempe Production at Batujajar UMKM
Article Sidebar
Page Numbers:
765-778
Digital Object Identifier:
10.58578/ijemt.v3i2.7204
Viewed: 309 times
Downloaded: 197 times
LYAS Publisher cordially invites qualified professionals to serve as Editors or Reviewers. Your expertise will make an important contribution to maintaining and strengthening the academic quality of our publications. Interested applicants are kindly requested to complete the application form at the following link: Editors & Reviewers
Please feel free to contact us if you need any further information about the submission process or if you have any additional questions.
Authors:
Anggita Salsa Billah1*, Rini Mulyani Sari2 
Copyright :
Authors retain copyright and grant the journal right of first publication.
Main Article Content
Abstract
This study addresses the limited application of structured quality control tools in traditional food production, particularly within small and medium-sized enterprises (SMEs) such as tempe producers, despite their importance for product consistency and consumer satisfaction. The research aims to identify and analyze the dominant factors contributing to product defects, with a specific focus on discoloration in tempe production, using the Fishbone Diagram and Failure Mode and Effects Analysis (FMEA) as analytical frameworks. Adopting a qualitative-descriptive case study design, one tempe-producing SME in Batujajar was purposively selected. Data were collected through field observations and in-depth interviews over four months (March–June 2025) and supported by defect records from January to September 2024. Findings indicate that the primary cause of discoloration is insufficient employee training, followed by inconsistent implementation of standard operating procedures (SOPs), inadequate temperature and humidity control, poor yeast storage, and environmental conditions. FMEA results show that human error due to lack of training had the highest Risk Priority Number (RPN = 288), marking it as the most critical failure mode. The study concludes that preventive solutions such as regular training, SOP standardization, and environmental monitoring are essential for improving tempe product quality. The implications extend to theoretical contributions in quality management within the informal food sector and practical recommendations for SMEs and policymakers to adopt low-cost, effective quality control strategies. Future research should explore the long-term effects of such interventions on business sustainability and customer satisfaction in small-scale food enterprises.
Citation Metrics:
Downloads
Article Details
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
References
Abdurohim, A. (2023). Digital sharia financial and business center can be realized now. JPPI (Jurnal Penelitian Pendidikan Indonesia), 9(4), 288–301. https://jurnal.iicet.org/index.php/jppi/article/view/2296/1843
Aprila, D., Andriani, W., & Ananto, R. P. (2023). Financial Management of Nagari Owned Enterprises (BUMNAG) and Its Impact on Community Welfare. Jurnal Akuntansi Bisnis, 16(2), 210–225. https://doi.org/10.30813/jab.v16i2.4461
Ayu, M. S., Andriani, W., & Sukartini, S. (2023). Factors Influencing The Use Of Accounting Information On SMEs In Padang. BIMA Journal (Business, Management, & Accounting Journal), 4(1), 107–114. https://doi.org/10.37638/bima.4.1.107-114
Fithri, P., Riva, N. A., Susanti, L., & Yuliandra, B. (2018). Safety analysis at weaving department of PT. X Bogor using Failure Mode and Effect Analysis (FMEA) and Fault Tree Analysis (FTA). IEA, 382–385. https://doi.org/10.1109/IEA.2018.8387129
Hanum, B. (2022). Quality Control Analysis of Metal Baseplate Finishing process using Statistical Process Control (SPC) and Failure Mode and Effect Analysis (FMEA): A Case Study of Indonesia Company. International Journal of Scientific and Academic Research, 2(6), 9–18. https://doi.org/10.54756/IJSAR.2022.V2.i6.2
Husrizal Syah, D., Rahman Dongoran, F., Wahyu Nugrahadi, E., & Aditia, R. (2022). Understanding the technology acceptance model in the QRIS usage: Evidence from SMEs in Indonesia. International Journal of Research in Business and Social Science, 11(6), 12–19. https://doi.org/10.20525/ijrbs.v11i6.1917
Li, X. D. G. (2024). Design and Application of Visual Performance Appraisal Based on the Fishbone Diagram. Xian Dai Guan Li, 14(9), 2285–2291. https://doi.org/10.12677/mm.2024.149267
Mulyana, I. J., Hartoyo, S. S., & Sianto, M. E. (2022). Defect Analysis of Printing Process in Offset Printing Industry by Using Failure Mode Effect Analysis (FMEA) and Fault Tree Analysis (FTA). Journal of Integrated System, 5(2), 143–155. https://doi.org/10.28932/jis.v5i2.5241
Novianti, F., & Rochmoeljati, R. (2023). Quality Control of Edamame Products Using Statistical Quality Control (SQC) and Failure Mode Effect Analysis (FMEA) Methods in PT. XYZ. IJIEM - Indonesian Journal of Industrial Engineering and Management, 4(2), 221. https://doi.org/10.22441/ijiem.v4i2.20550
Nugraha, E., Sari, R. M., Kurniawan, A., & Guslan, D. (2024). Analysis and implementation of the dmaic six sigma method as an effort to control weaving fabric production defects: Industrial textile case study. Edelweiss Applied Science and Technology, 8(5), 701–707. https://doi.org/10.55214/25768484.v8i5.1734
Nursyamsi, I., & Momon, A. (2022). Analisa Pengendalian Kualitas Menggunakan Metode Seven Tools untuk Meminimalkan Return Konsumen di PT. XYZ. Jurnal Serambi Engineering, 7(1), 2701–2708. https://doi.org/10.32672/jse.v7i1.3878
Pratama, R., Hadady, H., & Bailusy, M. N. (2022). Determinants of Use of the Indonesian Standard Quick Response Code (QRIS) on MSMEs in Ternate City. Budapest International Research and Critics Institute- Journal, 5(2), 10384–10392. https://doi.org/10.33258/birci.v5i2.4853 10384
Putri, A. W., Andriani, W., & Surya, F. (2022). Pengaruh Perceived Usefulness, Ease of Use, Security dan Risk terhadap Penggunaan E-wallet pada Mahasiswa Politeknik Negeri Padang. Accounting Information System, Taxes and Auditing Journal (AISTA Journal), 1(2), 80–87. https://doi.org/10.30630/aista.v1i2.18
Ramadhani, R. A., Fitriana, R., Habyba, A. N., & Liang, Y. C. (2023). Enhancing Quality Control of Packaging Product: A Six Sigma and Data Mining Approach. Jurnal Optimasi Sistem Industri, 22(2), 197–214. https://doi.org/10.25077/josi.v22.n2.p197-214.2023
Riptanti, E. W., Irianto, H., & Mujiyo, M. (2023). Challenges in the Development of Porang Tuber Processing Industry with the Fishbone Diagram Approach. Universal Journal of Agricultural Research, 11(5), 768–776. https://doi.org/10.13189/ujar.2023.110503
Romadhoni, A., & Dahdah, S. S. (2024). Quality Control Analysis of Painting Results in Steel Construction Projects Using Statistical Quality Control Methods and Failure Mode Effect Analysis at PT. BSB. Jurnal Teknik Industri, 10(1), 107. https://doi.org/10.24014/jti.v10i1.29580
Romi, M. V., Alsubki, N., Almadhi, H. M., & Propheto, A. (2022). The Linkage Between Leadership Styles, Employee Loyalty, and Turnover Intention in Healthcare Industry. Frontiers in Psychology, 13(April), 1–5. https://doi.org/10.3389/fpsyg.2022.890366
Santosa, D. S. R., & Palupi, G. S. (2024). Analisis Manajemen Risiko Dalam Penerapan Enterprise Resource Planning (Erp) Dengan Metode FMEA Pada PT XYZ. JEISBI (Journal of Emerging Information Systems and Business Inteligence, 05(02), 83–95. unesa.ac.id
Sari, R. M., & Nugraha, E. (2025). Strategic Design for Sustainable Productivity of Military Division of The Governmental Organization. Journal of Management and Business Environment, 6(2), 166–184. https://doi.org/10.24167/jmbe.v6i2.11960
Silalahi, M., Abdurohim, A., Romy, E., Candra, V., & Sudirman, A. (2022). The Involvement Locus of Control, Servant Leadership, and Innovative Work Behavior to Improve Teacher Performance. Jurnal Pendidikan Progresif, 12(2), 751–763. https://doi.org/10.23960/jpp.v12.i2.202227
Suciati, I., Idrus, I., Hajerina, H., Taha, N., & Wahyuni, D. S. (2023). Character and moral education based learning in students’ character development. International Journal of Evaluation and Research in Education, 12(3), 1185–1194. https://doi.org/10.11591/ijere.v12i3.25122
Sugiyono. (2024). Metode Penelitian Kuantitati, Kualitatif dan R&D. Bandung: Alfabeta.
Wibowo, L. A., Widjajanta, B., Fadillah, A., Riswanto, A., Aprianti, V., Widjaja, Y. R., Eka, A. P. B., Sujono, H., & Romi, M. V. (2020). Supply chain analysis of hedonic shopping value on behavioral intention creation of multinational footwear company. Uncertain Supply Chain Management, 8(4), 745–752. https://doi.org/10.5267/j.uscm.2020.7.005
Yentifa, A., Andriani, W., Jr, S. R., Aprila, D., & Sofia, G. (2023). Village Fund Accounting Model in Realizing Nagari Financial Accountability. Ilomata International Journal of Tax & Accounting, 4(4), 716–729. https://doi.org/10.52728/ijtc.v4i4.895