Pengaruh Aditif Monoethanolamine (MEA) terhadap Struktur Kristal Copper Tin Oxide The Influence of Monoethanolamine (MEA) Additive on the Crystal Structure of Copper Tin Oxide

Crossmark

Article Sidebar

Page Numbers: 295-304
Download PDF
Published: Nov 2, 2023
Digital Object Identifier: 10.58578/ajstea.v1i2.2046
Save this to:
Save to Mendeley Download RIS

Article Metrics:
Viewed: 520 times
Downloaded: 320 times
Article can trace at:

Author Fee:
Free Publication Fees for Foreign Researchers (USD 0.00)
Check for article on SINTA:

LYAS Publisher cordially invites qualified professionals to serve as Editors or Reviewers. Your expertise will make an important contribution to maintaining and strengthening the academic quality of our publications. Interested applicants are kindly requested to complete the application form at the following link: Editors & Reviewers

Connected Papers:
Connected Papers


Please feel free to contact us if you need any further information about the submission process or if you have any additional questions.


Authors:
Marlina Yulfitrianti1, Hary Sanjaya2, Septian Budiman3
Copyright :

Authors retain copyright and grant the journal right of first publication.

Explore Our Journals
Find the journal that best fits your research. If this journal does not match your manuscript’s scope, explore our portfolio below to select a more suitable publication venue.

Main Article Content

Marlina Yulfitrianti
Universitas Negeri Padang
Hary Sanjaya
Universitas Negeri Padang
Septian Budiman
Universitas Negeri Padang

Abstract

Solar cell technology is a technology that can create electrical energy using semiconductor devices that have p-n connections. Copper tin oxide CuSnO3 (CSO) is an amorphous oxide semiconductor with a band gap of 2.0–2.5 eV. The method used is sol gel with the addition of one of the commonly used additives, namely Monoethanolamine (MEA). This research aims to determine the effect of monoethanolamine additives on the crystal structure of Copper Tin Oxide using the Sol Gel method. This research is quantitative research by collecting data from previous research and then conducting research using specified methods and objects. The results of research using XRD showed particle sizes ranging from 40.10 – 50.02 nm and the results obtained without additives were 21.06 nm. This is because the addition of additives greatly influences the crystal size and crystal Structure.

Keywords:
Share Article:

Citation Metrics:

Scopus

Downloads

Download data is not yet available.

Citation Metrics & Similar Scopus Articles

Data source Crossref
0
citations
Citation counts are source-specific and may differ because database coverage, reference matching, and update schedules are different. Counts are not added together. Crossref values represent citation links registered and matched by Crossref.
Check Secondary Documents in Scopus
Open this article in Scopus, then check the Secondary documents tab. Use Manual Citation Fallback only for counts you have verified manually.
Open in Scopus
Similar Scopus Articles
Scopus
  1. Gao Z. (2027)
    Low-temperature brazing of oxygen-free copper and Kovar alloy for short-term high-temperature service through all-metal intermetallic compound joints
    Journal of Materials Science and Technology, 282, 290-300
  2. Khaloei A. (2027)
    Improving Parameters Affecting Copper Ore Flotation in a Darreh Alu Copper Complex Concentrator
    International Journal of Engineering Transactions A Basics, 40(3), 645-660
  3. Kenzhaliyev B.K. (2027)
    Predicting Copper Production Cycles in Hydrometallurgy with Interpretable Machine Learning
    Kompleksnoe Ispolzovanie Mineralnogo Syra, 341(2), 5-15

Article Details

How to Cite
Yulfitrianti, M., Sanjaya, H., & Budiman, S. (2023). Pengaruh Aditif Monoethanolamine (MEA) terhadap Struktur Kristal Copper Tin Oxide. Asian Journal of Science, Technology, Engineering, and Art, 1(2), 295-304. https://doi.org/10.58578/ajstea.v1i2.2046

Creative Commons License
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

References

Borhade, V., Tope, D. R., & Sangle, S. L. (2019). “ Synthesis , Characterization and Photocatalytic application of CuSnO 3 Perovskite oxide .” 6(3), 382–386.
Didik, L. A. (2020). PENENTUAN UKURAN BUTIR KRISTAL CuCr0,98Ni0,02O2 DENGAN MENGGUNAKAN X-RAY DIFRACTION (XRD) DAN SCANNING ELECTRON MICROSCOPE (SEM). Indonesian Physical Review, 3(1), 6–14. https://doi.org/10.29303/ipr.v3i1.37
Gnanamoorthy, G., Yadav, V. K., & Narayanan, V. (2020). Well organized assembly of (X)- CuSnO3 nanoparticles enhanced photocatalytic and anti-bacterial properties. Journal of Water Process Engineering, 36(March), 101258. https://doi.org/10.1016/j.jwpe.2020.101258
Huan, Y. U., A, Z. X., Zhongyi, Y. I. N., & Feng, T. A. O. (2007). Preparation of Nitrogen-doped Ti02 Nanoparticle Catalyst and Its Catalytic Activity under Visible Light *. 15, 802–807.
Kahl, G. (2015). I ndium t in o xide sensor (ITO) . The Dictionary of Genomics, Transcriptomics and Proteomics, 1–1. https://doi.org/10.1002/9783527678679.dg06035
Kasuma, S., Ningsih, W., Nasra, E., Rahayu, Y., Kimia, J., Matematika, F., Alam, P., & Padang, U. N. (2020). Sintesis Dan Karakterisasi Nanopartikel Co2+ Doped Zno Dengan Menggunakan Metode Sol-Gel. Indonesian Journal of Chemical Science, 9(1), 24–30.
Kim, Gab Kyung Seo, S. W. H., Hakki Yu, Byungmin Ahn, Hyungtak Seo, I. S., & Cho. (2017). Author ’ s Accepted Manuscript. Ceramics International. https://doi.org/10.1016/j.ceramint.2017.10.119
Ningsih, S. K. W. (2016). Sintesis Anorganik. In Angewandte Chemie International Edition, 6(11), 951–952.
Puspitaningrum, T., & Sujitno, T. (2017). Penentuan Band Gap Dan Konduktivitas Bahan. 739, 166–172.
Sari, R., Sanjaya, H., Yohandri, Y., Amran, A., & Putra, A. (2022). Degradasi Zat Warna Methyl Violet dengan Katalis ZnO/Ag Menggunakan Metode Fotosonolisis. Jurnal Periodic Jurusan Kimia UNP, 11(1), 24. https://doi.org/10.24036/p.v11i1.113261
Tanto, T., & Darmuji, D. (2020). Penerapan Internet of Things (IoT) Pada Alat Monitoring Energi Listrik. Jurnal Elektronika Listrik Dan Teknologi Informasi Terapan, 1(1), 45. https://doi.org/10.37338/e.v1i1.99
Vinothkumar, P., Manoharan, C., Shanmugapriya, B., & Bououdina, M. (2019). Effect of reaction time on structural, morphological, optical and photocatalytic properties of copper oxide (CuO) nanostructures. Journal of Materials Science: Materials in Electronics, 30(6), 6249–6262. https://doi.org/10.1007/s10854-019-00928-7
Xiong, L., Guo, Y., Wen, J., Liu, H., Yang, G., Qin, P., & Fang, G. (2018). Review on the Application of SnO2 in Perovskite Solar Cells. Advanced Functional Materials, 28(35). https://doi.org/10.1002/adfm.201802757
Akdağ. (2016). Akdağ_2016.pdf.
Borhade, V., Tope, D. R., & Sangle, S. L. (2019). “ Synthesis , Characterization and Photocatalytic application of CuSnO 3 Perovskite oxide .” 6(3), 382–386.
Didik, L. A. (2020). PENENTUAN UKURAN BUTIR KRISTAL CuCr0,98Ni0,02O2 DENGAN MENGGUNAKAN X-RAY DIFRACTION (XRD) DAN SCANNING ELECTRON MICROSCOPE (SEM). Indonesian Physical Review, 3(1), 6–14. https://doi.org/10.29303/ipr.v3i1.37
Gnanamoorthy, G., Yadav, V. K., & Narayanan, V. (2020). Well organized assembly of (X)- CuSnO3 nanoparticles enhanced photocatalytic and anti-bacterial properties. Journal of Water Process Engineering, 36(March), 101258. https://doi.org/10.1016/j.jwpe.2020.101258
Huan, Y. U., A, Z. X., Zhongyi, Y. I. N., & Feng, T. A. O. (2007). Preparation of Nitrogen-doped Ti02 Nanoparticle Catalyst and Its Catalytic Activity under Visible Light *. 15, 802–807.
Kahl, G. (2015). I ndium t in o xide sensor (ITO) . The Dictionary of Genomics, Transcriptomics and Proteomics, 1–1. https://doi.org/10.1002/9783527678679.dg06035
Kasuma, S., Ningsih, W., Nasra, E., Rahayu, Y., Kimia, J., Matematika, F., Alam, P., & Padang, U. N. (2020). Sintesis Dan Karakterisasi Nanopartikel Co2+ Doped Zno Dengan Menggunakan Metode Sol-Gel. Indonesian Journal of Chemical Science, 9(1), 24–30.
Kim, Gab Kyung Seo, S. W. H., Hakki Yu, Byungmin Ahn, Hyungtak Seo, I. S., & Cho. (2017). Author ’ s Accepted Manuscript. Ceramics International. https://doi.org/10.1016/j.ceramint.2017.10.119
Ningsih, S. K. W. (2016). Sintesis Anorganik. In Angewandte Chemie International Edition, 6(11), 951–952.
Puspitaningrum, T., & Sujitno, T. (2017). Penentuan Band Gap Dan Konduktivitas Bahan. 739, 166–172.
Sari, R., Sanjaya, H., Yohandri, Y., Amran, A., & Putra, A. (2022). Degradasi Zat Warna Methyl Violet dengan Katalis ZnO/Ag Menggunakan Metode Fotosonolisis. Jurnal Periodic Jurusan Kimia UNP, 11(1), 24. https://doi.org/10.24036/p.v11i1.113261
Tanto, T., & Darmuji, D. (2020). Penerapan Internet of Things (IoT) Pada Alat Monitoring Energi Listrik. Jurnal Elektronika Listrik Dan Teknologi Informasi Terapan, 1(1), 45. https://doi.org/10.37338/e.v1i1.99
Vinothkumar, P., Manoharan, C., Shanmugapriya, B., & Bououdina, M. (2019). Effect of reaction time on structural, morphological, optical and photocatalytic properties of copper oxide (CuO) nanostructures. Journal of Materials Science: Materials in Electronics, 30(6), 6249–6262. https://doi.org/10.1007/s10854-019-00928-7
Xiong, L., Guo, Y., Wen, J., Liu, H., Yang, G., Qin, P., & Fang, G. (2018). Review on the Application of SnO2 in Perovskite Solar Cells. Advanced Functional Materials, 28(35). https://doi.org/10.1002/adfm.201802757
Akdağ. (2016). Akdağ_2016.pdf.
Borhade, V., Tope, D. R., & Sangle, S. L. (2019). “ Synthesis , Characterization and Photocatalytic application of CuSnO 3 Perovskite oxide .” 6(3), 382–386.
Didik, L. A. (2020). PENENTUAN UKURAN BUTIR KRISTAL CuCr0,98Ni0,02O2 DENGAN MENGGUNAKAN X-RAY DIFRACTION (XRD) DAN SCANNING ELECTRON MICROSCOPE (SEM). Indonesian Physical Review, 3(1), 6–14. https://doi.org/10.29303/ipr.v3i1.37
Gnanamoorthy, G., Yadav, V. K., & Narayanan, V. (2020). Well organized assembly of (X)- CuSnO3 nanoparticles enhanced photocatalytic and anti-bacterial properties. Journal of Water Process Engineering, 36(March), 101258. https://doi.org/10.1016/j.jwpe.2020.101258
Huan, Y. U., A, Z. X., Zhongyi, Y. I. N., & Feng, T. A. O. (2007). Preparation of Nitrogen-doped Ti02 Nanoparticle Catalyst and Its Catalytic Activity under Visible Light *. 15, 802–807.
Kahl, G. (2015). I ndium t in o xide sensor (ITO) . The Dictionary of Genomics, Transcriptomics and Proteomics, 1–1. https://doi.org/10.1002/9783527678679.dg06035
Kasuma, S., Ningsih, W., Nasra, E., Rahayu, Y., Kimia, J., Matematika, F., Alam, P., & Padang, U. N. (2020). Sintesis Dan Karakterisasi Nanopartikel Co2+ Doped Zno Dengan Menggunakan Metode Sol-Gel. Indonesian Journal of Chemical Science, 9(1), 24–30.
Kim, Gab Kyung Seo, S. W. H., Hakki Yu, Byungmin Ahn, Hyungtak Seo, I. S., & Cho. (2017). Author ’ s Accepted Manuscript. Ceramics International. https://doi.org/10.1016/j.ceramint.2017.10.119
Ningsih, S. K. W. (2016). Sintesis Anorganik. In Angewandte Chemie International Edition, 6(11), 951–952.
Puspitaningrum, T., & Sujitno, T. (2017). Penentuan Band Gap Dan Konduktivitas Bahan. 739, 166–172.
Sari, R., Sanjaya, H., Yohandri, Y., Amran, A., & Putra, A. (2022). Degradasi Zat Warna Methyl Violet dengan Katalis ZnO/Ag Menggunakan Metode Fotosonolisis. Jurnal Periodic Jurusan Kimia UNP, 11(1), 24. https://doi.org/10.24036/p.v11i1.113261
Tanto, T., & Darmuji, D. (2020). Penerapan Internet of Things (IoT) Pada Alat Monitoring Energi Listrik. Jurnal Elektronika Listrik Dan Teknologi Informasi Terapan, 1(1), 45. https://doi.org/10.37338/e.v1i1.99
Vinothkumar, P., Manoharan, C., Shanmugapriya, B., & Bououdina, M. (2019). Effect of reaction time on structural, morphological, optical and photocatalytic properties of copper oxide (CuO) nanostructures. Journal of Materials Science: Materials in Electronics, 30(6), 6249–6262. https://doi.org/10.1007/s10854-019-00928-7
Xiong, L., Guo, Y., Wen, J., Liu, H., Yang, G., Qin, P., & Fang, G. (2018). Review on the Application of SnO2 in Perovskite Solar Cells. Advanced Functional Materials, 28(35). https://doi.org/10.1002/adfm.201802757
Borhade, V., Tope, D. R., & Sangle, S. L. (2019). “ Synthesis , Characterization and Photocatalytic application of CuSnO 3 Perovskite oxide .” 6(3), 382–386.
Didik, L. A. (2020). PENENTUAN UKURAN BUTIR KRISTAL CuCr0,98Ni0,02O2 DENGAN MENGGUNAKAN X-RAY DIFRACTION (XRD) DAN SCANNING ELECTRON MICROSCOPE (SEM). Indonesian Physical Review, 3(1), 6–14. https://doi.org/10.29303/ipr.v3i1.37
Gnanamoorthy, G., Yadav, V. K., & Narayanan, V. (2020). Well organized assembly of (X)- CuSnO3 nanoparticles enhanced photocatalytic and anti-bacterial properties. Journal of Water Process Engineering, 36(March), 101258. https://doi.org/10.1016/j.jwpe.2020.101258
Huan, Y. U., A, Z. X., Zhongyi, Y. I. N., & Feng, T. A. O. (2007). Preparation of Nitrogen-doped Ti02 Nanoparticle Catalyst and Its Catalytic Activity under Visible Light *. 15, 802–807.
Kahl, G. (2015). I ndium t in o xide sensor (ITO) . The Dictionary of Genomics, Transcriptomics and Proteomics, 1–1. https://doi.org/10.1002/9783527678679.dg06035
Kasuma, S., Ningsih, W., Nasra, E., Rahayu, Y., Kimia, J., Matematika, F., Alam, P., & Padang, U. N. (2020). Sintesis Dan Karakterisasi Nanopartikel Co2+ Doped Zno Dengan Menggunakan Metode Sol-Gel. Indonesian Journal of Chemical Science, 9(1), 24–30.
Kim, Gab Kyung Seo, S. W. H., Hakki Yu, Byungmin Ahn, Hyungtak Seo, I. S., & Cho. (2017). Author ’ s Accepted Manuscript. Ceramics International. https://doi.org/10.1016/j.ceramint.2017.10.119
Ningsih, S. K. W. (2016). Sintesis Anorganik. In Angewandte Chemie International Edition, 6(11), 951–952.
Puspitaningrum, T., & Sujitno, T. (2017). Penentuan Band Gap Dan Konduktivitas Bahan. 739, 166–172.
Sari, R., Sanjaya, H., Yohandri, Y., Amran, A., & Putra, A. (2022). Degradasi Zat Warna Methyl Violet dengan Katalis ZnO/Ag Menggunakan Metode Fotosonolisis. Jurnal Periodic Jurusan Kimia UNP, 11(1), 24. https://doi.org/10.24036/p.v11i1.113261
Tanto, T., & Darmuji, D. (2020). Penerapan Internet of Things (IoT) Pada Alat Monitoring Energi Listrik. Jurnal Elektronika Listrik Dan Teknologi Informasi Terapan, 1(1), 45. https://doi.org/10.37338/e.v1i1.99
Vinothkumar, P., Manoharan, C., Shanmugapriya, B., & Bououdina, M. (2019). Effect of reaction time on structural, morphological, optical and photocatalytic properties of copper oxide (CuO) nanostructures. Journal of Materials Science: Materials in Electronics, 30(6), 6249–6262. https://doi.org/10.1007/s10854-019-00928-7
Xiong, L., Guo, Y., Wen, J., Liu, H., Yang, G., Qin, P., & Fang, G. (2018). Review on the Application of SnO2 in Perovskite Solar Cells. Advanced Functional Materials, 28(35). https://doi.org/10.1002/adfm.201802757

Most read articles by the same author(s)

1 2 > >>