Pengaruh Aditif Monoethanolamine (MEA) terhadap Struktur Kristal Copper Tin Oxide
The Influence of Monoethanolamine (MEA) Additive on the Crystal Structure of Copper Tin Oxide
Please do not hesitate to contact us if you would like to obtain more information about the submission process or if you have further questions.
Abstract
Solar cell technology is a technology that can create electrical energy using semiconductor devices that have p-n connections. Copper tin oxide CuSnO3 (CSO) is an amorphous oxide semiconductor with a band gap of 2.0–2.5 eV. The method used is sol gel with the addition of one of the commonly used additives, namely Monoethanolamine (MEA). This research aims to determine the effect of monoethanolamine additives on the crystal structure of Copper Tin Oxide using the Sol Gel method. This research is quantitative research by collecting data from previous research and then conducting research using specified methods and objects. The results of research using XRD showed particle sizes ranging from 40.10 – 50.02 nm and the results obtained without additives were 21.06 nm. This is because the addition of additives greatly influences the crystal size and crystal Structure.
Citation Metrics:
Downloads
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
References
Didik, L. A. (2020). PENENTUAN UKURAN BUTIR KRISTAL CuCr0,98Ni0,02O2 DENGAN MENGGUNAKAN X-RAY DIFRACTION (XRD) DAN SCANNING ELECTRON MICROSCOPE (SEM). Indonesian Physical Review, 3(1), 6–14. https://doi.org/10.29303/ipr.v3i1.37
Gnanamoorthy, G., Yadav, V. K., & Narayanan, V. (2020). Well organized assembly of (X)- CuSnO3 nanoparticles enhanced photocatalytic and anti-bacterial properties. Journal of Water Process Engineering, 36(March), 101258. https://doi.org/10.1016/j.jwpe.2020.101258
Huan, Y. U., A, Z. X., Zhongyi, Y. I. N., & Feng, T. A. O. (2007). Preparation of Nitrogen-doped Ti02 Nanoparticle Catalyst and Its Catalytic Activity under Visible Light *. 15, 802–807.
Kahl, G. (2015). I ndium t in o xide sensor (ITO) . The Dictionary of Genomics, Transcriptomics and Proteomics, 1–1. https://doi.org/10.1002/9783527678679.dg06035
Kasuma, S., Ningsih, W., Nasra, E., Rahayu, Y., Kimia, J., Matematika, F., Alam, P., & Padang, U. N. (2020). Sintesis Dan Karakterisasi Nanopartikel Co2+ Doped Zno Dengan Menggunakan Metode Sol-Gel. Indonesian Journal of Chemical Science, 9(1), 24–30.
Kim, Gab Kyung Seo, S. W. H., Hakki Yu, Byungmin Ahn, Hyungtak Seo, I. S., & Cho. (2017). Author ’ s Accepted Manuscript. Ceramics International. https://doi.org/10.1016/j.ceramint.2017.10.119
Ningsih, S. K. W. (2016). Sintesis Anorganik. In Angewandte Chemie International Edition, 6(11), 951–952.
Puspitaningrum, T., & Sujitno, T. (2017). Penentuan Band Gap Dan Konduktivitas Bahan. 739, 166–172.
Sari, R., Sanjaya, H., Yohandri, Y., Amran, A., & Putra, A. (2022). Degradasi Zat Warna Methyl Violet dengan Katalis ZnO/Ag Menggunakan Metode Fotosonolisis. Jurnal Periodic Jurusan Kimia UNP, 11(1), 24. https://doi.org/10.24036/p.v11i1.113261
Tanto, T., & Darmuji, D. (2020). Penerapan Internet of Things (IoT) Pada Alat Monitoring Energi Listrik. Jurnal Elektronika Listrik Dan Teknologi Informasi Terapan, 1(1), 45. https://doi.org/10.37338/e.v1i1.99
Vinothkumar, P., Manoharan, C., Shanmugapriya, B., & Bououdina, M. (2019). Effect of reaction time on structural, morphological, optical and photocatalytic properties of copper oxide (CuO) nanostructures. Journal of Materials Science: Materials in Electronics, 30(6), 6249–6262. https://doi.org/10.1007/s10854-019-00928-7
Xiong, L., Guo, Y., Wen, J., Liu, H., Yang, G., Qin, P., & Fang, G. (2018). Review on the Application of SnO2 in Perovskite Solar Cells. Advanced Functional Materials, 28(35). https://doi.org/10.1002/adfm.201802757
Akdağ. (2016). Akdağ_2016.pdf.
Borhade, V., Tope, D. R., & Sangle, S. L. (2019). “ Synthesis , Characterization and Photocatalytic application of CuSnO 3 Perovskite oxide .” 6(3), 382–386.
Didik, L. A. (2020). PENENTUAN UKURAN BUTIR KRISTAL CuCr0,98Ni0,02O2 DENGAN MENGGUNAKAN X-RAY DIFRACTION (XRD) DAN SCANNING ELECTRON MICROSCOPE (SEM). Indonesian Physical Review, 3(1), 6–14. https://doi.org/10.29303/ipr.v3i1.37
Gnanamoorthy, G., Yadav, V. K., & Narayanan, V. (2020). Well organized assembly of (X)- CuSnO3 nanoparticles enhanced photocatalytic and anti-bacterial properties. Journal of Water Process Engineering, 36(March), 101258. https://doi.org/10.1016/j.jwpe.2020.101258
Huan, Y. U., A, Z. X., Zhongyi, Y. I. N., & Feng, T. A. O. (2007). Preparation of Nitrogen-doped Ti02 Nanoparticle Catalyst and Its Catalytic Activity under Visible Light *. 15, 802–807.
Kahl, G. (2015). I ndium t in o xide sensor (ITO) . The Dictionary of Genomics, Transcriptomics and Proteomics, 1–1. https://doi.org/10.1002/9783527678679.dg06035
Kasuma, S., Ningsih, W., Nasra, E., Rahayu, Y., Kimia, J., Matematika, F., Alam, P., & Padang, U. N. (2020). Sintesis Dan Karakterisasi Nanopartikel Co2+ Doped Zno Dengan Menggunakan Metode Sol-Gel. Indonesian Journal of Chemical Science, 9(1), 24–30.
Kim, Gab Kyung Seo, S. W. H., Hakki Yu, Byungmin Ahn, Hyungtak Seo, I. S., & Cho. (2017). Author ’ s Accepted Manuscript. Ceramics International. https://doi.org/10.1016/j.ceramint.2017.10.119
Ningsih, S. K. W. (2016). Sintesis Anorganik. In Angewandte Chemie International Edition, 6(11), 951–952.
Puspitaningrum, T., & Sujitno, T. (2017). Penentuan Band Gap Dan Konduktivitas Bahan. 739, 166–172.
Sari, R., Sanjaya, H., Yohandri, Y., Amran, A., & Putra, A. (2022). Degradasi Zat Warna Methyl Violet dengan Katalis ZnO/Ag Menggunakan Metode Fotosonolisis. Jurnal Periodic Jurusan Kimia UNP, 11(1), 24. https://doi.org/10.24036/p.v11i1.113261
Tanto, T., & Darmuji, D. (2020). Penerapan Internet of Things (IoT) Pada Alat Monitoring Energi Listrik. Jurnal Elektronika Listrik Dan Teknologi Informasi Terapan, 1(1), 45. https://doi.org/10.37338/e.v1i1.99
Vinothkumar, P., Manoharan, C., Shanmugapriya, B., & Bououdina, M. (2019). Effect of reaction time on structural, morphological, optical and photocatalytic properties of copper oxide (CuO) nanostructures. Journal of Materials Science: Materials in Electronics, 30(6), 6249–6262. https://doi.org/10.1007/s10854-019-00928-7
Xiong, L., Guo, Y., Wen, J., Liu, H., Yang, G., Qin, P., & Fang, G. (2018). Review on the Application of SnO2 in Perovskite Solar Cells. Advanced Functional Materials, 28(35). https://doi.org/10.1002/adfm.201802757
Akdağ. (2016). Akdağ_2016.pdf.
Borhade, V., Tope, D. R., & Sangle, S. L. (2019). “ Synthesis , Characterization and Photocatalytic application of CuSnO 3 Perovskite oxide .” 6(3), 382–386.
Didik, L. A. (2020). PENENTUAN UKURAN BUTIR KRISTAL CuCr0,98Ni0,02O2 DENGAN MENGGUNAKAN X-RAY DIFRACTION (XRD) DAN SCANNING ELECTRON MICROSCOPE (SEM). Indonesian Physical Review, 3(1), 6–14. https://doi.org/10.29303/ipr.v3i1.37
Gnanamoorthy, G., Yadav, V. K., & Narayanan, V. (2020). Well organized assembly of (X)- CuSnO3 nanoparticles enhanced photocatalytic and anti-bacterial properties. Journal of Water Process Engineering, 36(March), 101258. https://doi.org/10.1016/j.jwpe.2020.101258
Huan, Y. U., A, Z. X., Zhongyi, Y. I. N., & Feng, T. A. O. (2007). Preparation of Nitrogen-doped Ti02 Nanoparticle Catalyst and Its Catalytic Activity under Visible Light *. 15, 802–807.
Kahl, G. (2015). I ndium t in o xide sensor (ITO) . The Dictionary of Genomics, Transcriptomics and Proteomics, 1–1. https://doi.org/10.1002/9783527678679.dg06035
Kasuma, S., Ningsih, W., Nasra, E., Rahayu, Y., Kimia, J., Matematika, F., Alam, P., & Padang, U. N. (2020). Sintesis Dan Karakterisasi Nanopartikel Co2+ Doped Zno Dengan Menggunakan Metode Sol-Gel. Indonesian Journal of Chemical Science, 9(1), 24–30.
Kim, Gab Kyung Seo, S. W. H., Hakki Yu, Byungmin Ahn, Hyungtak Seo, I. S., & Cho. (2017). Author ’ s Accepted Manuscript. Ceramics International. https://doi.org/10.1016/j.ceramint.2017.10.119
Ningsih, S. K. W. (2016). Sintesis Anorganik. In Angewandte Chemie International Edition, 6(11), 951–952.
Puspitaningrum, T., & Sujitno, T. (2017). Penentuan Band Gap Dan Konduktivitas Bahan. 739, 166–172.
Sari, R., Sanjaya, H., Yohandri, Y., Amran, A., & Putra, A. (2022). Degradasi Zat Warna Methyl Violet dengan Katalis ZnO/Ag Menggunakan Metode Fotosonolisis. Jurnal Periodic Jurusan Kimia UNP, 11(1), 24. https://doi.org/10.24036/p.v11i1.113261
Tanto, T., & Darmuji, D. (2020). Penerapan Internet of Things (IoT) Pada Alat Monitoring Energi Listrik. Jurnal Elektronika Listrik Dan Teknologi Informasi Terapan, 1(1), 45. https://doi.org/10.37338/e.v1i1.99
Vinothkumar, P., Manoharan, C., Shanmugapriya, B., & Bououdina, M. (2019). Effect of reaction time on structural, morphological, optical and photocatalytic properties of copper oxide (CuO) nanostructures. Journal of Materials Science: Materials in Electronics, 30(6), 6249–6262. https://doi.org/10.1007/s10854-019-00928-7
Xiong, L., Guo, Y., Wen, J., Liu, H., Yang, G., Qin, P., & Fang, G. (2018). Review on the Application of SnO2 in Perovskite Solar Cells. Advanced Functional Materials, 28(35). https://doi.org/10.1002/adfm.201802757
Borhade, V., Tope, D. R., & Sangle, S. L. (2019). “ Synthesis , Characterization and Photocatalytic application of CuSnO 3 Perovskite oxide .” 6(3), 382–386.
Didik, L. A. (2020). PENENTUAN UKURAN BUTIR KRISTAL CuCr0,98Ni0,02O2 DENGAN MENGGUNAKAN X-RAY DIFRACTION (XRD) DAN SCANNING ELECTRON MICROSCOPE (SEM). Indonesian Physical Review, 3(1), 6–14. https://doi.org/10.29303/ipr.v3i1.37
Gnanamoorthy, G., Yadav, V. K., & Narayanan, V. (2020). Well organized assembly of (X)- CuSnO3 nanoparticles enhanced photocatalytic and anti-bacterial properties. Journal of Water Process Engineering, 36(March), 101258. https://doi.org/10.1016/j.jwpe.2020.101258
Huan, Y. U., A, Z. X., Zhongyi, Y. I. N., & Feng, T. A. O. (2007). Preparation of Nitrogen-doped Ti02 Nanoparticle Catalyst and Its Catalytic Activity under Visible Light *. 15, 802–807.
Kahl, G. (2015). I ndium t in o xide sensor (ITO) . The Dictionary of Genomics, Transcriptomics and Proteomics, 1–1. https://doi.org/10.1002/9783527678679.dg06035
Kasuma, S., Ningsih, W., Nasra, E., Rahayu, Y., Kimia, J., Matematika, F., Alam, P., & Padang, U. N. (2020). Sintesis Dan Karakterisasi Nanopartikel Co2+ Doped Zno Dengan Menggunakan Metode Sol-Gel. Indonesian Journal of Chemical Science, 9(1), 24–30.
Kim, Gab Kyung Seo, S. W. H., Hakki Yu, Byungmin Ahn, Hyungtak Seo, I. S., & Cho. (2017). Author ’ s Accepted Manuscript. Ceramics International. https://doi.org/10.1016/j.ceramint.2017.10.119
Ningsih, S. K. W. (2016). Sintesis Anorganik. In Angewandte Chemie International Edition, 6(11), 951–952.
Puspitaningrum, T., & Sujitno, T. (2017). Penentuan Band Gap Dan Konduktivitas Bahan. 739, 166–172.
Sari, R., Sanjaya, H., Yohandri, Y., Amran, A., & Putra, A. (2022). Degradasi Zat Warna Methyl Violet dengan Katalis ZnO/Ag Menggunakan Metode Fotosonolisis. Jurnal Periodic Jurusan Kimia UNP, 11(1), 24. https://doi.org/10.24036/p.v11i1.113261
Tanto, T., & Darmuji, D. (2020). Penerapan Internet of Things (IoT) Pada Alat Monitoring Energi Listrik. Jurnal Elektronika Listrik Dan Teknologi Informasi Terapan, 1(1), 45. https://doi.org/10.37338/e.v1i1.99
Vinothkumar, P., Manoharan, C., Shanmugapriya, B., & Bououdina, M. (2019). Effect of reaction time on structural, morphological, optical and photocatalytic properties of copper oxide (CuO) nanostructures. Journal of Materials Science: Materials in Electronics, 30(6), 6249–6262. https://doi.org/10.1007/s10854-019-00928-7
Xiong, L., Guo, Y., Wen, J., Liu, H., Yang, G., Qin, P., & Fang, G. (2018). Review on the Application of SnO2 in Perovskite Solar Cells. Advanced Functional Materials, 28(35). https://doi.org/10.1002/adfm.201802757