Effectiveness of Diethanolamine (DEA) Addition on Band Gap Value of SnO2 by Using Sol-Gel Methods
Article Sidebar
Page Numbers:
195-203
Digital Object Identifier:
10.58578/ajstea.v2i2.2743
Viewed: 499 times
Downloaded: 334 times
LYAS Publisher cordially invites qualified professionals to serve as Editors or Reviewers. Your expertise will make an important contribution to maintaining and strengthening the academic quality of our publications. Interested applicants are kindly requested to complete the application form at the following link: Editors & Reviewers
Please feel free to contact us if you need any further information about the submission process or if you have any additional questions.
Authors:
Miftah Patriela1, Hary Sanjaya2* 
Copyright :
Authors retain copyright and grant the journal right of first publication.
Main Article Content
Abstract
The need for electrical energy is increasing with the increase in the economy and population in Indonesia. Fossil energy sources are used as fuel to produce electrical energy and will run out if used continuously. Fossil energy sources can be replaced by using New Renewable Energy (NRE) to meet national electrical energy needs. The purpose of adding additives in this study is to observe the effectiveness of the addition of DEA on the band gap value, crystal phase, and surface morphology on SnO2. In this study using the sol-gel method for the synthesis of SnO2. The sol-gel method is the conversion of monomers into colloidal solutions (sol) which serve as precursors for integrated networks (gels) either discrete particles or network polymers. SnO2 nanomaterials will be characterized by UV-DRS Spectrophotometer. The results of characterization of SnO2 nanomaterials with the addition of Diethanolamine additives as much as 1.5 mL have obtained a band gap value of 3.60 eV.
Downloads
Article Details
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
References
Adistia, N. A., Nurdiansyah, R. A., Fariko, J., Vincent, V., & Simatupang, J. W. (2020). Potensi energi panas bumi, angin, dan biomassa menjadi energi listrik di Indonesia. TESLA: Jurnal Teknik Elektro, 22(2), 105-116.
Al-Saadi, T. M., Hussein, B. H., Hasan, A. B., & Shehab, A. A. (2019). Study the structural and optical properties of Cr doped SnO 2 nanoparticles synthesized by sol-gel method. Energy Procedia, 157, 457–465. https://doi.org/10.1016/j.egypro.2018.11.210
Ansari, F., Sobhani, A., & Salavati-Niasari, M. (2018). Simple sol-gel synthesis and characterization of new CoTiO3/CoFe2O4 nanocomposite by using liquid glucose, maltose and starch as fuel, capping and reducing agents. Journal of Colloid and Interface Science, 514, 723–732.
Arini, T., Lalasari, L. H., Setiawan, I., Andriyah, L., Natasha, N. C., Yunita, F. E., & Suharyanto, A. (2022). STRUKTUR KRISTAL DAN MORFOLOGI PERMUKAAN – SINTESIS SNO2 MENGGUNAKAN METODE SOL-GEL. Jurnal Rekayasa Mesin, 13(2), 427–433. https://doi.org/10.21776/jrm.v13i2.1048
Aziz, M., Abbas, S. S., Baharom, W. R. W., & Mahmud, W. Z. W. (2012). Structure of SnO2 nanoparticles by sol–gel method. Materials Letters, 74, 62–64. doi:10.1016/j.matlet.2012.01.073
Borhade, V., Tope, D. R., & Sangle, S. L. (2019). Synthesis, characterization and photocatalytic application of CuSnO 3 perovskite oxide. Journal of Emerging Technologies and Innovative Research, 6(3), 382–386.
Brunner, I. M. I. M., & Brunner, S. M. (2021). Pemilihan Baterai Kendaraan Listrik dengan Metoda Weighted Objective. Jurnal Serambi Engineering, 6(1).
Costa, J. C. S., Taveira, R. J. S., Lima, C. F. R. A. C., Mendes, A., & Santos, L. M. N. B. F. (2016). Optical band gaps of organic semiconductor materials. Optical Materials, 58, 51–60. https://doi.org/10.1016/j.optmat.2016.03.041
Fathia, A. (2018). Sintesis dan karakterisasi graphene oxide terkombinasi nanopartikel perak dalam fase cair. Yogyakarta: Universitas Negeri Yogyakarta.
Ilican, S., Caglar, Y., Caglar, M., & Yakuphanoglu, F. (2008). Structural, optical and electrical properties of F-doped ZnO nanorod semiconductor thin films deposited by sol-gel process. Applied Surface Science, 255(5), 2353–2359.
Isherwood, P. J. M., Butler, K. T., Walsh, A., & Walls, J. M. (2015). A tunable amorphous p-type ternary oxide system: The highly mismatched alloy of copper tin oxide. Journal of Applied Physics, 118(10), 105702.
Kasuma, S., Ningsih, W., Nasra, E., Rahayu, Y., Kimia, J., Matematika, F., Alam, P., & Padang, U. N. (2020). Sintesis dan karakterisasi nanopartikel Co2+ doped ZnO dengan menggunakan metode sol-gel. Indonesian Journal of Chemical Science, 9(1), 24–30.
Kim, B. N., Seo, G. K., Hwang, S. W., Yu, H., Ahn, B., Seo, H., & Cho, I. S. (2018). Photophysical properties and photoelectrochemical performances of sol-gel derived copper stannate (CuSnO3) amorphous semiconductor for solar water splitting application. Ceramics International, 44(2), 1843–1849.
Kose, H., Karaal, S., Aydin, A. O., & Akbulut, H. (2015). Structural properties of size-controlled SnO2 nanopowders produced by sol–gel method. Materials Science in Semiconductor Processing, 38, 404-412. https://doi.org/10.1016/j.mssp.2015.03.028
Liu, T., Du, R. bin, & Kong, X. jun. (2012). Preparation and electrochemical properties of amorphous tin-copper composite oxide CuSnO 3. Advanced Materials Research, 535–537, 31–35.
Mugundan, S., Rajamannan, B., Viruthagiri, G., Shanmugam, N., Gobi, R., & Praveen, P. (2015). Synthesis and characterization of undoped and cobalt-doped TiO2 nanoparticles via sol–gel technique. Applied Nanoscience (Switzerland), 5(4), 449–456.
Ning, T., Ji, F., Ma, J., Song, Z., Pei, X., & Tan, Y. (2009). Study on fabrication and properties of copper-tin-oxide thin films. Advanced Materials Research, 79–82, 787–790.
Ningsih, S. K. W., Nizar, U. K., Bahrizal, Nasra, E., & Suci, R. F. (2019). Effect of egg white as additive for synthesis and characterization of Al doped ZNO nanoparticles by using sol-gel method. Journal of Physics: Conference Series 1185. doi:10.1088/1742-6596/1185/1/012029.
Ningsih, S. K. W., Sanjaya, H., Bahrizal, Nasra, E., & Yurnas, S. (2021). Synthesis of Cu2+ Doped ZnO by the Combination of Sol-Gel-Sonochemical Methods with Duck Egg Albumen as Additive for Photocatalytic Degradation of Methyl Orange. Indonesian Journal of Chemical Science, 21(3), 564-574.
Ningsih, S. K. W. (2016). Sintesis Anorganik. Padang: UNP Press.
Patel, G. H., Chaki, S. H., Kannaujiya, R. M., Parekh, Z. R., Hirpara, A. B., Khimani, A. J., & Deshpande, M. P. (2021). Sol-gel synthesis and thermal characterization of SnO2 nanoparticles. Physica B: Condensed Matter, 613. https://doi.org/10.1016/j.physb.2021.412987
Saini, K. K., Sharma, S. D., Chanderkant, Kar, M., Singh, D., & Sharma, C. P. (2007). Structural and optical properties of TiO2 thin films derived by sol-gel dip coating process. Journal of Non-Crystalline Solids, 353(24–25), 2469–2473.
Sanjaya, H., Hardeli, & Syafitri, R. (2018). Degradasi Metil Violet Menggunakan Katalis ZnO-TiO2 secara Fotosonolisis. EKSAKTA: Berkala Ilmiah Bidang MIPA, 19(1), 91–99.
Shobana, M. K. (2019). Metal oxide coated cathode materials for Li ion batteries e A review. Journal of Alloys and Compounds, 477-487. https://doi.org/10.1016/j.jallcom.2019.06.194.
Suchanek, K., Bartkowiak, A., Perzanowski, M., & Marszałek, M. (2018). From monetite plate to hydroxyapatite nanofibers by monoethanolamine assisted hydrothermal approach. Scientific Reports, 8(1), 15408.
Rahayu, S., Herawati, N., & Wijaya, M. (2020). Sintesis Nanopartikel Mangan Oksida dengan Metode Sol Gel dan Uji Aktivitas Katalitik terhadap Degradasi Zat Warna Rhodamin B. Jurnal Chemica, Vol.21(2), 190-199.
Rahmawati, E. R., & Nazriati, N. (2022). Biosintesis dan karakterisasi nanopartikel tembaga oksida (CuO) menggunakan ekstrak rimpangg kencur (Kaempferia galanga L.). Jurnal Teknik Kimia, 28 (3), 141-151. https://doi.org/10.36706/jtk.v28i3.1232.
Ryanuargo, Anwar, S., & Sari, S. P. (2013). Generator mini dengan prinsip termoelektrik dari uap panas kondensor pada sistem pendingin. Jurnal Rekayasa Elektrika, 10(4), 180–185.
Wang, B., Biesold, G. M., Zhang, M., & Lin, Z. (2021). Amorphous inorganic semiconductors for the development of solar cell, photoelectrocatalytic and photocatalytic applications. Chemical Society Reviews, 50(12), 6914–6949.
Wang, M., Wang, T., Song, S. H., Ravi, M., Liu, R. C., & Ji, S. S. (2017). Effect of calcination temperature on structural, magnetic and optical properties of multiferroic YFeO3 nanopowders synthesized by a low temperature solidstates reaction. Ceramics International, 43(13), 10270-10276. https://doi.org/10.1016/j.ceramint.2017.05.056
Widodo, S. (2020). Review Sensor Gas Berbasis Metal Oksida Semikonduktor Untuk Mendeteksi Gas Polutan Yang Selektif Dan Sensitif. Techno-Socio Ekonomika, 12(2), 92-112.