Pembuatan Alat Monitoring dan Kontrol Tanaman Cabai berbasis Internet of Things (IoT) Development of an Internet of Things (IoT)-Based Monitoring and Control Device for Chili Plants
Article Sidebar
Page Numbers:
3551-3564
Digital Object Identifier:
10.58578/tsaqofah.v5i4.6398
Viewed: 323 times
Downloaded: 150 times
LYAS Publisher cordially invites qualified professionals to serve as Editors or Reviewers. Your expertise will make an important contribution to maintaining and strengthening the academic quality of our publications. Interested applicants are kindly requested to complete the application form at the following link: Editors & Reviewers
Please feel free to contact us if you need any further information about the submission process or if you have any additional questions.
Authors:Elgi Elgi1, Ryan Fikri2
Copyright :Authors retain copyright and grant the journal right of first publication.
Main Article Content
Abstract
This study is motivated by challenges in chili cultivation, particularly the need for timely irrigation and pesticide spraying, as well as monitoring environmental humidity and temperature, which significantly affect plant productivity. The objective of this research is to design and develop an Internet of Things (IoT)-based monitoring and control system to enhance the efficiency of chili plant care. The system was developed using the Waterfall method, encompassing requirement analysis, design, implementation, and testing stages. Key components include a soil moisture sensor for detecting soil humidity, a DHT11 sensor for measuring air temperature and humidity, and an ESP32 microcontroller integrated with the Blynk application for remote control. Testing results show that the sensors function accurately, with an average temperature measurement error of 0.3%. The automated irrigation system activates when soil moisture falls below a set threshold, and pesticide spraying can be remotely controlled via smartphone. The study concludes that the developed system is effective in supporting precision agriculture practices and contributes to improving the productivity and efficiency of modern chili cultivation.
Citation Metrics:
Downloads
Citation Metrics & Similar Scopus Articles
-
Sardar Khan S.K. (2027)MXene-based biosensors for biomedical diagnostics: From molecular recognition to wearable systemsAdvances in Biomarker Sciences and Technology, 9(1), 46-69
-
Mirzahosseini M. (2027)A Review of Constitutive Modeling of Unsaturated SoilsIranian Journal of Geophysics, 20(3), 81-128
-
Saran S. (2027)CHECKLIST OF TEREBRANTIAN THRIPS (THYSANOPTERA) INCLUDING FIFTEEN NEW RECORDS FROM UTTARAKHANDIndian Journal of Entomology, 89(1), 192-202
Article Details
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
References
Feri Djuandi. 2011. “Pengenalan Arduino.” E-book. www. tobuku: 1–24.
Fitriadi, Bayu Refindra, and Ayutia Ciptaningtyas Putri. 2016. “Metode-Metode Pengurangan Residu Pestisida Pada Hasil Pertanian.” Jurnal Rekayasa Kimia & Lingkungan 11(2): 61–71. doi:10.23955/rkl.v11i2.4950.
Ibrahim, Syam AM, Meriatna M, Mulyawan R, Munira S, Aulia MR, and Munouwarah L. 2023. “Red Clam Shell Based Basic Heterogenous Catalyst for Transesterification of Ricinus Communis L Oil Synthesis and Characterization.” Proceedings of Malikussaleh International Conference on Multidisciplinary Studies (MICoMS) 3(3): 00017. doi:10.29103/micoms.v3i.177.
Ibrahim, Ilyas, and Sahrir Sillehu. 2022. 7 JUMANTIK (Jurnal Ilmiah Penelitian Kesehatan) Identifikasi Aktivitas Penggunaan Pestisida Kimia Yang Berisiko Pada Kesehatan Petani Hortikultura. Maluku: jurnal Jumantik. doi:10.30829/jumantik.v7i1.10332.
Irawan Y, Sabna E, Azim JF, Wahyuni R, Belardbi N, dan Josephine MM. 2022. “Automatic Chili Plant Watering Based On Internet Of Things (IoT).” journal of Applied Engineering and Technological Sience Vol. 3 no.
Irianto, Kurniawan D. 2023. “Pre-SEMMS: A Design of Prepaid Smart Energy Meter Monitoring System for Household Uses Based on Internet of Things.” Journal of electronics, electromedical engineering, and medical informatics 5(2): 69–74.
Maulana, Krysna Yudha. 2022. “Mengenal Apa Itu Thermal Overload Relay (TOR) Dan Fungsinya.”
Nidia Qurota A’yunin, Achdiyat dan Tri Ratna Saridewi. 2020. “Preferensi Anggota Kelompok Tani Terhadap Penerapan Prinsip Enam Tepat (6T) Dalam Aplikasi Pestisida.” Inovasi Penelitian 1 no 3.
Novianto A, Farida I, dan Sahertian J. 2021. “Alat Penyiram Tanaman Otomatis Berbasis IoT Menggunakan Metode Fuzzy Logic.” Kediri : Seminar Inovasi dan Teknologi UNPK 5.
Pamungkas, Oktofa Setia. 2016. 14 Bahaya Paparan Pestisida Terhadap Kesehatan Manusia. Semarang: Bioedukasi.
Rahardjo VA, & Setyadi. 2021. “Implementasi Sensor Pengukur Kelembapan Tanah Dan Penyiraman Otomatis Serta Monitoring Pada Kebun Tanaman Cabai Rawit.” Pringsewu : Aisyah Journal of Informatics and Electrical Engineering UAP Lampung Vol. 3.
Rizki, Miftahul, Raffi Az-zarqi, Dimas Aditya, Muhammad Habib Farhan, Program Studi, Teknik Informatika, and Universitas Primagraha. “Pengukur Kelembaban Tanah Dalam Monitoring Pertanian Menggunakan Sensor Soil Moisture Berbasis Arduino.”
Sigit Umar Anggono, Edy Siswanto, Laksamana Rajendra Haidar Azani Fajri, and Munifah. 2023. “User Interface Berbasis Web Pada Perangkat Internet Of Things.” Teknik: Jurnal Ilmu Teknik dan Informatika 3(1): 35–54. doi:10.51903/teknik.v3i1.326.
Tedistya, Nisa Nurislam, Winarno, and Triuli Novianti. 2020. “Pengembangan Rancang Bangun Alat Penyiram Tanaman Cabai Otomatis Pendeteksi Kelembaban Tanah Berbasis Mikrokontroller Arduino Uno (Greenhouse).” Ilmiah 2(1): 1–8. https://www.arduinoindonesia.id/2018/08/arduino-uno-r3.html.