Development of an Enhanced Remote Monitoring System of Diesel Levels in Telecom Base Stations
Main Article Content
Abstract
This study presents the design and implementation of an enhanced Internet of Things (IoT)-based remote monitoring system for managing diesel levels and voltage status in telecommunication base stations (TBSs) to improve operational reliability and reduce fuel-related inefficiencies. A prototype system was developed by integrating ultrasonic fuel-level and voltage sensors with an Arduino Nano microcontroller and an ESP8266 Wi-Fi module. The system transmitted data to a cloud-based IoT platform for real-time visualization and automated alert generation, enabling continuous monitoring and timely notification of critical operating conditions. The system was evaluated in terms of efficiency, reliability, and cost performance under varying load conditions. The results demonstrated a 24.6% increase in monitoring efficiency, a 31% reduction in generator downtime, and an 18% reduction in operational costs compared with manual monitoring methods. These findings indicate that the proposed system offers a scalable, cost-effective, and energy-efficient solution for enhancing transparency, reducing manual oversight, and supporting more sustainable power management in telecommunication base stations. The study contributes practical evidence on the effectiveness of IoT-enabled monitoring for infrastructure management in energy-dependent telecommunications environments.

Citation Metrics:


Downloads
Article Details

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
References
Alabi, O. O., Ajagbe, S. A., Adeaga, O. A., & Adigun, M. O. (2023). Investigating fuel adulteration using Arduino as an engine protection device (EPD). Journal of Hunan University Natural Sciences, 50(9), 107–113. https://doi.org/10.55463/issn.1674-2974.50.9.11
Aravindan, C., Kumar, G. V., Arthi, R., & Abhilash, R. (2022). A fuel level indicator using load cell through an audio feed output and location tracker for visually impaired. In 2022 International Conference on Communication, Computing and Internet of Things (IC3IoT) (pp. 1–4). IEEE. https://doi.org/10.1109/IC3IOT53935.2022.9767892
Azzawi, B. Z. S., Al Saddaee, I. A. R., Yigit, M. E., & Ari, M. (2023). Design and implementation of photovoltaic monitoring energy system based on telecommunication power base station application. International Journal on Technical and Physical Problems of Engineering, 15(2), 141–148.
Danyaya, Y. S., John, O., Ahmed, A., & Iliyasu, U. (2024). Economic viability analysis for powering base station in remote areas using diesel generator and stand-alone PV system. International Journal of Advances in Engineering and Management, 6(9), 42–51. https://ijaem.net/issue_dcp/Economic%20Viability%20Analysis%20for%20Powering%20Base%20Station%20in%20Remote%20Areas%20Using%20Diesel%20Generator%20and%20Stand%20Alone%20Pv%20System.pdf
Ebong, E. A. Y. (2018). Automated system for monitoring fueling operations on telecommunication tower sites [Master’s thesis, University of Padova]. https://aims-cameroon.org/wp-content/uploads/sites/6/2021/04/Ebude_AUTOMATED-SYSTEM-FOR-MONITORING-FUELING-OPERATIONS-ON-TELECOMMUNICATION-TOWER-SITES.pdf
Kamthe, S., Bodkhe, K., Karnavat, M., Shaikh, B., & Pawar, S. S. (2020). Automatic fuel tank monitoring and leakage detection. International Research Journal of Engineering and Technology, 7(5), 1319–1322. https://www.irjet.net/archives/V7/i5/IRJET-V7I5258.pdf
Kuetche, C. F. M., Tsuanyo, D., & Fopah-Lele, A. (2022). Analysis of hybrid energy systems for telecommunications equipment: A case study in Buea, Cameroon. E3S Web of Conferences, 354, 02007. https://doi.org/10.1051/e3sconf/202235402007
Omar, M. Z. A., & Mohamad, K. A. (2023). Development of a remote monitoring system for voltage measurements in cathodic protection. Evolution in Electrical and Electronic Engineering, 4(1), 566–571. https://doi.org/10.30880/eeee.2023.04.01.068
Rai, N. R., Rajguru, P. D., Jagtap, A. N., & Shinde, A. S. (2020). A review on: Digital fuel level and battery life indicator. International Engineering Research Journal, 3(4), 6174–6177.
Somefun, T., Awosope, C., Abdulkareem, A., Ogelenya, J., Orimogunje, A., & Somefun, C. (2021). Design of a digital fuel gauge with distance-to-zero indicator. IOP Conference Series: Materials Science and Engineering, 1036(1), 012063. https://doi.org/10.1088/1757-899X/1036/1/012063
Tahir, M., Mustafa, S. M. N., Enam, R. N., Ismat, N., & Rizvi, H. H. (2022). Real-time monitoring and control of electrical diesel generator through Internet of Things. Pakistan Journal of Engineering and Technology, 5(2), 112–118. https://doi.org/10.51846/vol5iss2pp112-118
Wang, F., Yang, F., Su, C., & He, N. (2018). The design of intelligent low voltage circuit breaker remote data monitoring system. In Proceedings of the 2018 3rd International Conference on Control, Automation and Artificial Intelligence (CAAI 2018) (pp. 71–74). Atlantis Press. https://doi.org/10.2991/caai-18.2018.16
Yamini, N., Kumar, R. B., Mohamed, J. S., & Iyengar, N. C. S. N. (2023). Smart IoT-based system for monitoring and detecting fuel theft and fuel indication for refilling process. International Journal of Human Computations and Intelligence, 2(5), 247–255. https://doi.org/10.5281/zenodo.8068149














