The Effectiveness of the Project-Based Learning Model Based on Autodesk Inventor on Students’ Learning Outcomes in the Manufacturing Engineering Drawing Subject at SMK Negeri 1 Padang
Article Sidebar
Page Numbers:
969-981
Digital Object Identifier:
10.58578/mikailalsys.v4i2.10065
Viewed: 93 times
Downloaded: 65 times
LYAS Publisher cordially invites qualified professionals to serve as Editors or Reviewers. Your expertise will make an important contribution to maintaining and strengthening the academic quality of our publications. Interested applicants are kindly requested to complete the application form at the following link: Editors & Reviewers
Please feel free to contact us if you need any further information about the submission process or if you have any additional questions.
Authors:Oktorio Yumiko1, Mulianti Mulianti2
Copyright :Authors retain copyright and grant the journal right of first publication.
Main Article Content
Abstract
Project-based learning supported by digital design technology has become increasingly relevant in vocational education; however, empirical evidence on its application with Autodesk Inventor in Manufacturing Engineering Drawing remains limited. This study aims to evaluate the effectiveness of the Autodesk Inventor-based Project-Based Learning model in improving students’ learning outcomes in the Manufacturing Engineering Drawing subject at SMK Negeri 1 Padang. A quantitative approach with a quasi-experimental non-equivalent control group design was employed. The participants consisted of 40 Grade XI Mechanical Engineering students selected through purposive sampling and divided into an experimental class and a control class. Data were collected through pretest, posttest, and documentation and were analyzed using descriptive statistics, the Shapiro–Wilk normality test, Levene’s homogeneity test, and paired sample t-test with the assistance of SPSS. The findings indicate that both classes experienced significant improvement; however, the experimental class achieved a higher mean score increase than the control class. The experimental class improved from 48.30 to 66.85, whereas the control class improved from 44.25 to 57.55. The posttest comparison showed a 16.15% difference in favor of the experimental class. The study concludes that Autodesk Inventor-based Project-Based Learning is effective in improving students’ learning outcomes in vocational technical drawing. These findings provide practical implications for vocational education by highlighting the importance of integrating project-based pedagogical models with digital design technology to support more effective learning in Manufacturing Engineering Drawing.
Citation Metrics:
Downloads
Citation Metrics & Similar Scopus Articles
-
Achilova S.S. (2027)Activation of the mineralized mass of Central Kyzylkum using acidic wastewater from the oil and fat industry: Freundlich-based adsorption kinetics for fluorine releaseKompleksnoe Ispolzovanie Mineralnogo Syra, 342(3), 65-79
-
Naemi Z. (2027)The Relationship between Second Language Learning Strategies, Learning Engagement, and Writing Skill in the Arabic Writing CurriculumLanguage Related Research, 17(4), 331-360
-
Wu Y. (2027)Strategies of Designing High-Efficiency Electrolyte Additives for Aqueous Magnesium Batteries: A ReviewNano Micro Letters, 19(1)
Article Details
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
References
Abdulrasool, S. M., & Mishra, R. (2009). Using computer technology tools to improve the teaching-learning process in technical and vocational education: Mechanical engineering subject area. *The International Journal of Learning: Annual Review, 15*(12), 155–168. [https://doi.org/10.18848/1447-9494/CGP/v15i12/46059](https://doi.org/10.18848/1447-9494/CGP/v15i12/46059)
Adawiah, R., & Maulida, D. (2024). Efektivitas Model Pembelajaran Project Based Learning terhadap Hasil Belajar Kognitif Siswa pada Mata Pelajaran PPKn di SMP Negeri 21 Banjarmasin. *Jurnal Pendidikan Kewarganegaraan, 14*(1), 63–69. [https://doi.org/10.20527/kewarganegaraan.v14i1.20123](https://doi.org/10.20527/kewarganegaraan.v14i1.20123)
Agalya, V., & Seneviratne, D. V. K. P. (2024). Multifaceted instructional design strategies in improving generic science skills (GSS): A review. *SLIIT Journal of Humanities and Sciences, 5*(2), 56–83. [https://doi.org/10.4038/sjhs.v5i2.74](https://doi.org/10.4038/sjhs.v5i2.74)
Athaya, A. M., Kusmiati, M., & Faturachman, M. A. (2024). The analysis of project-based learning models implementation on student motivation and learning achievement. *Curricula: Journal of Curriculum Development, 3*(2), 347–362. [https://doi.org/10.17509/curricula.v3i2.63535](https://doi.org/10.17509/curricula.v3i2.63535)
Belan, V. (2024). Digital platform as a means of vocational training and communication for future skilled workers in the mechanical engineering industry. *Professional Pedagogics, 2*(29), 189–199. [https://doi.org/10.32835/2707-3092.2024.29.189-199](https://doi.org/10.32835/2707-3092.2024.29.189-199)
Chang, T.-S., Wang, H.-C., Haynes, A. M., Song, M.-M., Lai, S.-Y., & Hsieh, S.-H. (2022). Enhancing student creativity through an interdisciplinary, project-oriented problem-based learning undergraduate curriculum. *Thinking Skills and Creativity, 46*, Article 101173. [https://doi.org/10.1016/j.tsc.2022.101173](https://doi.org/10.1016/j.tsc.2022.101173)
Fitra, R., Prasetya, F., & Adri, J. (2024). Exploration of the implementation of project-based learning in technical drawing courses toward. *Journal of Engineering Researcher and Lecturer, 3*(1), 46–55. [https://doi.org/10.58712/jerel.v3i1.128](https://doi.org/10.58712/jerel.v3i1.128)
Gao, M., Wang, Q., Wang, N., Ma, Z., & Li, L. (2021). Application of green design and manufacturing in mechanical engineering: Education, scientific research, and practice. *Sustainability, 14*(1), Article 237. [https://doi.org/10.3390/su14010237](https://doi.org/10.3390/su14010237)
Gomes, D., Lopes, L., & Alves, J. L. (2025). Bridging the gap: Project-based learning in industrial design education. *The International Journal of Design Education, 19*(1), 109–140. [https://doi.org/10.18848/2325-128X/CGP/v19i01/109-140](https://doi.org/10.18848/2325-128X/CGP/v19i01/109-140)
Hamidah, I., & Citra, S. Y. (2021). Efektivitas Model Pembelajaran Project Based Learning (PjBL) terhadap Minat dan Hasil Belajar Siswa. *BIOEDUSAINS: Jurnal Pendidikan Biologi dan Sains, 4*(2), 307–314. [https://doi.org/10.31539/bioedusains.v4i2.2870](https://doi.org/10.31539/bioedusains.v4i2.2870)
Huang, F. (2025). Exploring a new model of undergraduate vocational education. *Vocation, Technology & Education, 2*(1), Article e3. [https://doi.org/10.54844/vte.2025.0869](https://doi.org/10.54844/vte.2025.0869)
Inderanata, R. N., & Sukardi, T. (2023). Investigation study of integrated vocational guidance on work readiness of mechanical engineering vocational school students. *Heliyon, 9*(2), Article e13333. [https://doi.org/10.1016/j.heliyon.2023.e13333](https://doi.org/10.1016/j.heliyon.2023.e13333)
Ismail, A. A., & Hassan, R. (2019). Technical competencies in digital technology towards industrial revolution 4.0. *Journal of Technical Education and Training, 11*(3), 55–62. [https://doi.org/10.30880/jtet.2019.11.03.008](https://doi.org/10.30880/jtet.2019.11.03.008)
Mohd Kamaruzaman, F., Nik Othman, N. N. J., Omar, M., & Mohd Zaid, M. F. A. (2025). Future generic skills for technical vocational education graduates. *International Journal of Learning, Teaching and Educational Research, 24*(3), 312–332. [https://doi.org/10.26803/ijlter.24.3.15](https://doi.org/10.26803/ijlter.24.3.15)
Nugraha, M. A., Syahri, B., Waskito, W., & Primawati, P. (2022). Implementasi Augmented Reality dalam Mata Pelajaran Teknik Bubut di Jurusan Teknik Mesin SMK Muhammadiyah 1 Padang. *Jurnal Vokasi Mekanika (VoMek), 4*(2), 6–10. [https://doi.org/10.24036/vomek.v4i1.327](https://doi.org/10.24036/vomek.v4i1.327)
Perić, J., Oberman Peterka, S., & Getoš, Ž. (2020). The role of vocational education in developing entrepreneurial competences of students. *Ekonomski pregled, 71*(5), 463–492. [https://doi.org/10.32910/ep.71.5.2](https://doi.org/10.32910/ep.71.5.2)
Ridwan, R., Saputra, R., & Mardiyah, M. (2025). Exploring project-based learning within an independent curriculum: A qualitative inquiry into technical drawing competence in vocational automotive education. *Journal of Transdisiplinary Studies in Education, 1*(2), 91–101. [https://doi.org/10.64268/jtse.v1i2.60](https://doi.org/10.64268/jtse.v1i2.60)
Saralar-Aras, İ., & Aınsworth, S. (2025). Teacher practices and student understandings in 2D drawings of 3D shapes. *Bartın University Journal of Faculty of Education, 14*(1), 130–150. [https://doi.org/10.14686/buefad.1420814](https://doi.org/10.14686/buefad.1420814)
Ssenyonga, M., & Shafiullah, M. (2021). Imperatives for post COVID-19 recovery of Indonesia’s education, labor, and SME sectors. *Cogent Economics & Finance, 9*(1), Article 1911439. [https://doi.org/10.1080/23322039.2021.1911439](https://doi.org/10.1080/23322039.2021.1911439)
Sulaiman, G., & Ambotang, A. S. (2017). The role of basic vocational education towards students employability. *International Journal of Vocational Education and Training Research, 3*(1), 1–6. [https://doi.org/10.11648/j.ijvetr.20170301.11](https://doi.org/10.11648/j.ijvetr.20170301.11)
Ulugov, B. D. (2020). Efficiency of use of Autodesk Inventor engineering programs and pedagogical information technologies in the field of “Resistance of materials” in the process of teaching students of technical universities. *ACADEMICIA: An International Multidisciplinary Research Journal, 10*(5), 130–143. [https://doi.org/10.5958/2249-7137.2020.00253.0](https://doi.org/10.5958/2249-7137.2020.00253.0)
UNESCO. (2022). *Transforming technical and vocational education and training for successful and just transitions: UNESCO strategy 2022–2029*. [https://unesdoc.unesco.org/ark:/48223/pf0000383360](https://unesdoc.unesco.org/ark:/48223/pf0000383360)
Utami, S., Yuliany, E. H., & Remetwa, M. G. K. (2025). Digitalisation in vocational education: Enhancing skills and job readiness in developing countries. *Indonesian Journal of Education (INJOE), 4*(2), 208–215. [https://felifa.net/index.php/INJOE/article/view/275](https://felifa.net/index.php/INJOE/article/view/275)
Vygotsky, L. S. (1978). *Mind in society: The development of higher psychological processes*. Harvard University Press.
Wahyu, A., Rostini, D., & Holik, A. (2025). Learning management of machining engineering skill concentration in improving the competence of SMK students. *At Turots: Jurnal Pendidikan Islam, 7*(1), 299–307. [https://doi.org/10.51468/jpi.v7i1.867](https://doi.org/10.51468/jpi.v7i1.867)
Younes, Z., Younes, Z., Salah, N., & Khalifa, M. (2025). Enhancing technical drawing education: A study of augmented reality versus physical models. In M. E. Auer & T. Rüütmann (Eds.), *Futureproofing engineering education for global responsibility: Proceedings of the 27th International Conference on Interactive Collaborative Learning (ICL2024), Volume 4* (pp. 52–63). Springer. [https://doi.org/10.1007/978-3-031-83520-9_5](https://doi.org/10.1007/978-3-031-83520-9_5)