Effectiveness of Diethanolamine (DEA) Addition on Band Gap Value of SnO2 by Using Sol-Gel Methods

Published
2024-02-21
Digital Object Identifier: 10.58578/ajstea.v2i2.2743
Save this to:
Article Metrics:
Viewed : 117 times
Downloaded : 68 times
Article can trace at:

Author Fee:
Free Publication Fees for Foreign Researchers (0.00)

Please do not hesitate to contact us if you would like to obtain more information about the submission process or if you have further questions.




  • Miftah Patriela Universitas Negeri Padang
  • Hary Sanjaya Universitas Negeri Padang

Abstract

The need for electrical energy is increasing with the increase in the economy and population in Indonesia. Fossil energy sources are used as fuel to produce electrical energy and will run out if used continuously. Fossil energy sources can be replaced by using New Renewable Energy (NRE) to meet national electrical energy needs. The purpose of adding additives in this study is to observe the effectiveness of the addition of DEA on the band gap value, crystal phase, and surface morphology on SnO2. In this study using the sol-gel method for the synthesis of SnO2. The sol-gel method is the conversion of monomers into colloidal solutions (sol) which serve as precursors for integrated networks (gels) either discrete particles or network polymers. SnO2 nanomaterials will be characterized by UV-DRS Spectrophotometer. The results of characterization of SnO2 nanomaterials with the addition of Diethanolamine additives as much as 1.5 mL have obtained a band gap value of 3.60 eV.

Keywords: Diethanolamine; SnO2 Nanomaterial; Sol-gel

Citation Metrics:






Downloads

Download data is not yet available.
How to Cite
Patriela, M., & Sanjaya, H. (2024). Effectiveness of Diethanolamine (DEA) Addition on Band Gap Value of SnO2 by Using Sol-Gel Methods. Asian Journal of Science, Technology, Engineering, and Art, 2(2), 195-203. https://doi.org/10.58578/ajstea.v2i2.2743

References

Adistia, N. A., Nurdiansyah, R. A., Fariko, J., Vincent, V., & Simatupang, J. W. (2020). Potensi energi panas bumi, angin, dan biomassa menjadi energi listrik di Indonesia. TESLA: Jurnal Teknik Elektro, 22(2), 105-116.

Al-Saadi, T. M., Hussein, B. H., Hasan, A. B., & Shehab, A. A. (2019). Study the structural and optical properties of Cr doped SnO 2 nanoparticles synthesized by sol-gel method. Energy Procedia, 157, 457–465. https://doi.org/10.1016/j.egypro.2018.11.210

Ansari, F., Sobhani, A., & Salavati-Niasari, M. (2018). Simple sol-gel synthesis and characterization of new CoTiO3/CoFe2O4 nanocomposite by using liquid glucose, maltose and starch as fuel, capping and reducing agents. Journal of Colloid and Interface Science, 514, 723–732.

Arini, T., Lalasari, L. H., Setiawan, I., Andriyah, L., Natasha, N. C., Yunita, F. E., & Suharyanto, A. (2022). STRUKTUR KRISTAL DAN MORFOLOGI PERMUKAAN – SINTESIS SNO2 MENGGUNAKAN METODE SOL-GEL. Jurnal Rekayasa Mesin, 13(2), 427–433. https://doi.org/10.21776/jrm.v13i2.1048

Aziz, M., Abbas, S. S., Baharom, W. R. W., & Mahmud, W. Z. W. (2012). Structure of SnO2 nanoparticles by sol–gel method. Materials Letters, 74, 62–64. doi:10.1016/j.matlet.2012.01.073

Borhade, V., Tope, D. R., & Sangle, S. L. (2019). Synthesis, characterization and photocatalytic application of CuSnO 3 perovskite oxide. Journal of Emerging Technologies and Innovative Research, 6(3), 382–386.

Brunner, I. M. I. M., & Brunner, S. M. (2021). Pemilihan Baterai Kendaraan Listrik dengan Metoda Weighted Objective. Jurnal Serambi Engineering, 6(1).

Costa, J. C. S., Taveira, R. J. S., Lima, C. F. R. A. C., Mendes, A., & Santos, L. M. N. B. F. (2016). Optical band gaps of organic semiconductor materials. Optical Materials, 58, 51–60. https://doi.org/10.1016/j.optmat.2016.03.041

Fathia, A. (2018). Sintesis dan karakterisasi graphene oxide terkombinasi nanopartikel perak dalam fase cair. Yogyakarta: Universitas Negeri Yogyakarta.

Ilican, S., Caglar, Y., Caglar, M., & Yakuphanoglu, F. (2008). Structural, optical and electrical properties of F-doped ZnO nanorod semiconductor thin films deposited by sol-gel process. Applied Surface Science, 255(5), 2353–2359.

Isherwood, P. J. M., Butler, K. T., Walsh, A., & Walls, J. M. (2015). A tunable amorphous p-type ternary oxide system: The highly mismatched alloy of copper tin oxide. Journal of Applied Physics, 118(10), 105702.

Kasuma, S., Ningsih, W., Nasra, E., Rahayu, Y., Kimia, J., Matematika, F., Alam, P., & Padang, U. N. (2020). Sintesis dan karakterisasi nanopartikel Co2+ doped ZnO dengan menggunakan metode sol-gel. Indonesian Journal of Chemical Science, 9(1), 24–30.

Kim, B. N., Seo, G. K., Hwang, S. W., Yu, H., Ahn, B., Seo, H., & Cho, I. S. (2018). Photophysical properties and photoelectrochemical performances of sol-gel derived copper stannate (CuSnO3) amorphous semiconductor for solar water splitting application. Ceramics International, 44(2), 1843–1849.

Kose, H., Karaal, S., Aydin, A. O., & Akbulut, H. (2015). Structural properties of size-controlled SnO2 nanopowders produced by sol–gel method. Materials Science in Semiconductor Processing, 38, 404-412. https://doi.org/10.1016/j.mssp.2015.03.028

Liu, T., Du, R. bin, & Kong, X. jun. (2012). Preparation and electrochemical properties of amorphous tin-copper composite oxide CuSnO 3. Advanced Materials Research, 535–537, 31–35.

Mugundan, S., Rajamannan, B., Viruthagiri, G., Shanmugam, N., Gobi, R., & Praveen, P. (2015). Synthesis and characterization of undoped and cobalt-doped TiO2 nanoparticles via sol–gel technique. Applied Nanoscience (Switzerland), 5(4), 449–456.

Ning, T., Ji, F., Ma, J., Song, Z., Pei, X., & Tan, Y. (2009). Study on fabrication and properties of copper-tin-oxide thin films. Advanced Materials Research, 79–82, 787–790.

Ningsih, S. K. W., Nizar, U. K., Bahrizal, Nasra, E., & Suci, R. F. (2019). Effect of egg white as additive for synthesis and characterization of Al doped ZNO nanoparticles by using sol-gel method. Journal of Physics: Conference Series 1185. doi:10.1088/1742-6596/1185/1/012029.

Ningsih, S. K. W., Sanjaya, H., Bahrizal, Nasra, E., & Yurnas, S. (2021). Synthesis of Cu2+ Doped ZnO by the Combination of Sol-Gel-Sonochemical Methods with Duck Egg Albumen as Additive for Photocatalytic Degradation of Methyl Orange. Indonesian Journal of Chemical Science, 21(3), 564-574.

Ningsih, S. K. W. (2016). Sintesis Anorganik. Padang: UNP Press.

Patel, G. H., Chaki, S. H., Kannaujiya, R. M., Parekh, Z. R., Hirpara, A. B., Khimani, A. J., & Deshpande, M. P. (2021). Sol-gel synthesis and thermal characterization of SnO2 nanoparticles. Physica B: Condensed Matter, 613. https://doi.org/10.1016/j.physb.2021.412987

Saini, K. K., Sharma, S. D., Chanderkant, Kar, M., Singh, D., & Sharma, C. P. (2007). Structural and optical properties of TiO2 thin films derived by sol-gel dip coating process. Journal of Non-Crystalline Solids, 353(24–25), 2469–2473.

Sanjaya, H., Hardeli, & Syafitri, R. (2018). Degradasi Metil Violet Menggunakan Katalis ZnO-TiO2 secara Fotosonolisis. EKSAKTA: Berkala Ilmiah Bidang MIPA, 19(1), 91–99.

Shobana, M. K. (2019). Metal oxide coated cathode materials for Li ion batteries e A review. Journal of Alloys and Compounds, 477-487. https://doi.org/10.1016/j.jallcom.2019.06.194.

Suchanek, K., Bartkowiak, A., Perzanowski, M., & Marszałek, M. (2018). From monetite plate to hydroxyapatite nanofibers by monoethanolamine assisted hydrothermal approach. Scientific Reports, 8(1), 15408.

Rahayu, S., Herawati, N., & Wijaya, M. (2020). Sintesis Nanopartikel Mangan Oksida dengan Metode Sol Gel dan Uji Aktivitas Katalitik terhadap Degradasi Zat Warna Rhodamin B. Jurnal Chemica, Vol.21(2), 190-199.

Rahmawati, E. R., & Nazriati, N. (2022). Biosintesis dan karakterisasi nanopartikel tembaga oksida (CuO) menggunakan ekstrak rimpangg kencur (Kaempferia galanga L.). Jurnal Teknik Kimia, 28 (3), 141-151. https://doi.org/10.36706/jtk.v28i3.1232.

Ryanuargo, Anwar, S., & Sari, S. P. (2013). Generator mini dengan prinsip termoelektrik dari uap panas kondensor pada sistem pendingin. Jurnal Rekayasa Elektrika, 10(4), 180–185.

Wang, B., Biesold, G. M., Zhang, M., & Lin, Z. (2021). Amorphous inorganic semiconductors for the development of solar cell, photoelectrocatalytic and photocatalytic applications. Chemical Society Reviews, 50(12), 6914–6949.

Wang, M., Wang, T., Song, S. H., Ravi, M., Liu, R. C., & Ji, S. S. (2017). Effect of calcination temperature on structural, magnetic and optical properties of multiferroic YFeO3 nanopowders synthesized by a low temperature solidstates reaction. Ceramics International, 43(13), 10270-10276. https://doi.org/10.1016/j.ceramint.2017.05.056

Widodo, S. (2020). Review Sensor Gas Berbasis Metal Oksida Semikonduktor Untuk Mendeteksi Gas Polutan Yang Selektif Dan Sensitif. Techno-Socio Ekonomika, 12(2), 92-112.

Most read articles by the same author(s)

1 2 > >>