Efek Penambahan Diethanolamine dan Suhu Kalsinasi terhadap Energi Gap Lapisan Tipis CuSnO3

The Effect of Diethanolamine Addition and Calcination Temperature on the Energy Gap of CuSnO3 Thin Films

Page Numbers: 281-294
Published
2023-11-02
Digital Object Identifier: 10.58578/ajstea.v1i2.2045
Save this to:
Article Metrics:
Viewed : 115 times
Downloaded : 104 times
Article can trace at:

Author Fee:
Free Publication Fees for Foreign Researchers (0.00)

Please do not hesitate to contact us if you would like to obtain more information about the submission process or if you have further questions.




  • Vira Ananda Sukma Universitas Negeri Padang
  • Hary Sanjaya Universitas Negeri Padang

Abstract

This study focuses on the synthesis of CuSnO3 thin films using the sol-gel dip coating method, with a particular emphasis on the effects of diethanolamine (DEA) addition and calcination temperature on the bandgap energy. The successful addition of DEA significantly influenced the reduction of the bandgap energy of CuSnO3 thin films, decreasing from 3.21 eV (without DEA) to 2.11 eV (optimal DEA addition, 1.5 mL), as characterized by UV-DRS. Furthermore, different calcination temperatures yielded varying bandgap energies, with the lowest bandgap energy observed in samples calcined at 550°C. This research provides valuable insights into the manipulation of CuSnO3 thin film properties for potential applications in optoelectronic devices and other emerging technologies.

Keywords: CuSnO3; Diethanolamine; Dip Coating; Optoelectronic Material; Band Gap Energy

Citation Metrics:






Downloads

Download data is not yet available.
How to Cite
Sukma, V. A., & Sanjaya, H. (2023). Efek Penambahan Diethanolamine dan Suhu Kalsinasi terhadap Energi Gap Lapisan Tipis CuSnO3. Asian Journal of Science, Technology, Engineering, and Art, 1(2), 281-294. https://doi.org/10.58578/ajstea.v1i2.2045

References

Aminullah, M. W., Setiawan, H., Huda, A., Samaulah, H., Haryati, S., & Bustan, M. D. (2019). Pengaruh Komposisi Material Semikonduktor dalam Menurunkan Energi Band Gap dan Terhadap Konversi Gelombang Mikro. Jurnal EECCIS, 65-70.

Benelmekki, M., & Erbe, A. (2019). Nanostructured Thin Film-Background, Preparation and Relation to The Technological Revolution of The 21st Century. Elsevier Ltd.

Borhade, V., Tope, D., & Sangle, S. (2019). Synthesis, Characterization, and Photocatalytic Application of CuSnO3 Perovskite Oxide. Journal of Emerging Technologies and Innovative Research (JETIR), 382-386.

Chen, Y.-F., Lee, C.-Y., Yeng, M.-Y., & Chiu, H.-t. (2003). The Effect of Calcination Temperature on The Crystallinity of TiO2 Nanopowders. Journal of Crystal Growth, 363-370.

Kim, B. N., Seo, G. K., Hwang, S. W., Yu, H., Ahn, B., Seo, H., & Cho, I. S. (2018). Photophysical Properties and Photoelectrochemical Performances of Sol-Gel Derived Copper Stannate (CuSnO3) Amorphous Semiconductor for Solar Water Splitting Application. Ceramics International, 1-13.

Kuriah, Y., & Sugihartono, I. (2018). Studi Deposisi Lapisan Tipis ZnO Menggunakan Teknik Dip Coating. Wahana Fisika, 88-92.

Liman, J., Harsono, B., & Soenandi, I. A. (2023). Sintesi dan Karakterisasi Sifat Optik Material Feroelektrik Barium Zirkonium Titanat (BaZr0,5Ti0,5O3) dengan Variasi Suhu Kalsinasi. Jurnal Teori dan Aplikasi Fisika, 81-88.

Liu, T., Du, R.-b., & Kong, X.-j. (2012). Preparation and Electrochemical Properties of Amorphous Tin-copper Composite Oxide CuSnO3. Trans Tech Publications, 31-35.

Mohanta, D., Raha, S., Gupta, S. V., & Ahmaruzzaman, M. (2019). Bioinspired Green Synthesis of Engineered CuSnO3 Quantum Dots: An Effective Material for Superior Photocatalytic Degradation of Rabeprazole. Materials Letters, 193-196.

Ning, T., Ji, F., Ma, J., Song, Z., Pei, X., & Tan, Y. (2009). Study on Fabrication and Properties of Copper-tin-oxide Thin Films. Trans Tech Publications, 787-790.

Oral, A., Mensur, E., Aslan, M., & Basaran, E. (2003). The Preparation of Copper (II) Oxide thin Films and The Study of Their Microstructures and Optical Properties. Materials Chemistry and Physics, 140-144.

Salaha, M., Murphy, P., Hall, C., Francis, C., Kerr, R., & Fabretto, M. (2019). Pure Silicon Thin-Film Anodes for Lithium-Ion Batteries: A Review. Journal of Power Sources, 48-67.

Tahar, R. B., Tahar, N. B., & Salah, A. B. (2007). Preparation and Characterization of PZT Solid Solutions Via Sol-Gel Process. Journal of Crystal Growth, 40-43.

Wanarattikan, P., Jitthammapirom, P., Sakdanuphab, R., & Sakulkalavek, A. (2019). Effect of Grain Size and Film Thickness on the Thermoelectric Properties of Flexible Sb2Te3 Thin Films. Advances in Materials Science and Engineering, 1-7.

Zhang, H., Wang, X., wang, J., Chen, Q., Huang, H., Huang, L., . . . Ma, X. (2020). UV-Visible Diffuse Reflectance Spectroscopy Used in Analysis of Lignocellulosic Biomass Material. Wood Science and Technology.

Zhou, J., Zhao, G., Ren, X., Song, B., & Han, G. (2011). Effects pf Diethanolamine on The Evolution of Silver/Titanium Dioxide Sol-Gel Process. Sol-Gel Sci Technol, 148-155.

Most read articles by the same author(s)

1 2 > >>