Pengaruh Konsentrasi Perkursor terhadap Sifat Listrik dari Lapisan Tipis
Effect of Precursor Concentration on the Electrical Properties of Thin Films
Published
2023-11-07
Digital Object Identifier:
10.58578/ajstea.v1i2.2068
Article Metrics:
Viewed : 71 times
Downloaded : 68 times
Viewed : 71 times
Downloaded : 68 times
Article can trace at:
Author Fee:
Free Publication Fees for Foreign Researchers (0.00)
Please do not hesitate to contact us if you would like to obtain more information about the submission process or if you have further questions.
Abstract
A thin layer is a layer made from organic or non-organic materials which are semiconductors, conductors and insulators. This research aims to determine the effect of precursor concentration on the electrical properties of thin films. Variations in precursor concentration used were 0.025 M, 0.05 M, and 0.075 M. CuSnO3 thin films were characterized by UV-DRS, XRD, FPP, and SEM. The method used in this research is sol-gel. The sol-gel process is used because of its ability to control the surface properties of oxide composites. The results of the band-gap test the variation in precursor concentration obtained by the band-gap value becomes smaller with increasing concentration. The lowest band-gap value in variations in adding an MEA volume of 2 ml, the optimum band-gap value is 2.1706 eV. The results of the FPP test on a thin layer of CuSnO3 precursor concentration of 0.05 M with an optimum MEA of 2 ml obtained a resistivity value of 0.0005671 Ωm with a conductivity value of 173.5809 Ω^(-1) m^(-1).
Downloads
Download data is not yet available.
How to Cite
Rindiani, M., Sanjaya, H., & Budiman, S. (2023). Pengaruh Konsentrasi Perkursor terhadap Sifat Listrik dari Lapisan Tipis. Asian Journal of Science, Technology, Engineering, and Art, 1(2), 331-337. https://doi.org/10.58578/ajstea.v1i2.2068
Section
Articles
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
References
Aminullah, M. W., Setiawan, H., Huda, A., Samaulah, H., Haryati, S., & Bustan, M. D. (2019). Pengaruh Komposisi Material Semikonduktor Dalam Menurunkan Energi Band Gap Terhadap Konversi Gelombang Mikro. Jurnal EECCIS, 13(2), 65–70.
Brinker, Russel C. (1994). Elementary Surveying, Harper and Row. United State of America.
Dan, S., Kimia, K., Tipis, L., Sn, S., Dengan, P., & Evaporasi, T. (n.d.). STRUKTUR DAN KOMPOSISI KIMIA LAPISAN TIPIS Sn(S. 1–8.
Fang, Z. F. ; Liu, Z. L. ; Dai, J. J. ; Qian, H. Y. ; Qi, Z. L. ; Ma, L. B. ; Peng, J., 2009. Effects of enzyme addition on the nutritive value of broiler diets containing hulled or dehulled Chinese double-low rapeseed meals. J. Anim. Physiol. Anim. Nutr., 93 (4): 467-476
Isherwood, P. J. M., Butler, K. T., Walsh, A., & Walls, J. M. (2015). A tunable amorphous p-type ternary oxide system: The highly mismatched alloy of copper tin oxide. Journal of Applied Physics, 118(10). https://doi.org/10.1063/1.4929752.
Kasuma Warda Ningsih, S., Kalmar Nizar, U., Bahrizal, B., Nasra, E., & Fatimah Mutiara R, S. (2021). Sintesis Mg2+ doped ZnO dengan penambahan albumen ayam ras menggunakan gabungan metode sol-gel dan sonokimia. Jurnal Riset Kimia, 12(1), 27–35. https://doi.org/10.25077/jrk.v12i1.374
Kasuma Warda Ningsih, S., Nasra, E., Yanna Rahayu Jurusan Kimia, dan, Matematika dan Ilmu Pengetahuan Alam, F., Negeri Padang Jl Hamka, U., & Tawar, A. (2020). Indonesian Journal of Chemical Science Sintesis dan Karakterisasi Nanopartikel Co 2+ doped ZnO dengan Menggunakan Metode Sol-Gel. J. Chem. Sci, 9(1), 2–8. http://journal.unnes.ac.id/sju/index.php/ijcs
Kim, B. N., Seo, G. K., Hwang, S. W., Yu, H., Ahn, B., Seo, H., & Cho, I. S. (2018). Photophysical properties and photoelectrochemical performances of sol-gel derived copper stannate (CuSnO3) amorphous semiconductor for solar water splitting application. Ceramics International, 44(2), 1843–1849. https://doi.org/10.1016/j.ceramint.2017.10.119
Liu, T., Du, R. bin, & Kong, X. jun. (2012). Preparation and electrochemical properties of amorphous tin-copper composite oxide CuSnO 3. Advanced Materials Research, 535–537(Cl), 31–35. https://doi.org/10.4028/www.scientific.net/AMR.535-537.31
Marotti, R. E., Giorgi, P., Machado, G., & Dalchiele, E. A. (2006). Crystallite size dependence of band gap energy for electrodeposited ZnO grown at different temperatures. Solar Energy Materials and Solar Cells, 90(15), 2356–2361. https://doi.org/10.1016/j.solmat.2006.03.008
M. Sholeh kosim (2012) , dkk. Buku Ajar Neonatologi. Ikatan Dokter Anak Indonesia. Jakarta
Mohanta, D., Raha, S., Vikram Gupta, S., & Ahmaruzzaman, M. (2019). Bioinspired green synthesis of engineered CuSnO 3 quantum dots: An effective material for superior photocatalytic degradation of Rabeprazole. Materials Letters, 240, 193–196. https://doi.org/10.1016/j.matlet.2018.12.104
Ning, T., Ji, F., Ma, J., Song, Z., Pei, X., & Tan, Y. (2009). Study on fabrication and properties of copper-tin-oxide thin films. Advanced Materials Research, 79–82, 787–790. https://doi.org/10.4028/www.scientific.net/AMR.79-82.787
Surono, A. T., & Sutanto, H. (2014). SIFAT OPTIK Zinc Oxide (ZnO) YANG DIDEPOSISI DI ATAS SUBSTRAT KACA MENGGUNAKAN METODE CHEMICAL SOLUTION DEPOSITION (CSD) DAN APLIKASINYA UNTUK DEGRADASI ZAT WARNA METHYLENE BLUE. Youngster Physics Journal, 2(1), 7–14.
Wang, C. C., & Ying, J. Y. (1999). Sol-gel synthesis and hydrothermal processing of anatase and rutile titania nanocrystals. Chemistry of Materials, 11(11), 3113–3120. https://doi.org/10.1021/cm990180f.
Rahman, D., Sustini, E., & Abdullah, M. (2017). Fabrikasi Transparant Conducting Film Berbahan Dasar Grafit pada Substrat Plastik dengan Proses Mekanik. Jurnal Matematika Dan Sains, 22(1), 33–36. https://doi.org/10.5614/jms.2017.22.1.9
Rizaldi, D. R., Doyan, A., & Susilawati, S. (2021). SINTESIS LAPISAN TIPIS TiO2:(F+In) PADA SUBSTRAT KACA DENGAN METODE SPIN- COATING SEBAGAI BAHAN SEL SURYA. ORBITA: Jurnal Kajian, Inovasi Dan Aplikasi Pendidikan Fisika, 7(1), 219. https://doi.org/10.31764/orbita.v7i1.4655
Shin, H. H., Joung, Y. H., & Kang, S. J. (2009). Influence of the substrate temperature on the optical and electrical properties of Ga-doped ZnO thin films fabricated by pulsed laser deposition. Journal of Materials Science: Materials in Electronics, 20(8), 704–708. https://doi.org/10.1007/s10854-008-9788-9
Salah, M., Murphy, P., Hall, C., Francis, C., Kerr, R., & Fabretto, M. (2019). Pure silicon thin-film anodes for lithium-ion batteries: A review. Journal of Power Sources, 414(November 2018), 48–67. https://doi.org/10.1016/j.jpowsour.2018.12.068.
Suchanek, K., Bartkowiak, A., Perzanowski, M., & Marszałek, M. (2018). From monetite plate to hydroxyapatite nanofibers by monoethanolamine assisted hydrothermal approach.Scientific Reports, 8(1), 1–9. https://doi.org/10.1038/s41598-018-33936-4
Park, S. K., Han, J. I., Kim, W. K., & Kwak, M. G. (2001). Deposition of indium- tin-oxide films on polymer substrates for application in plastic-based flat panel displays. Thin Solid Films, 397(1–2), 49–55. https://doi.org/10.1016/S0040- 6090(01)01489-4
Yu, Z., Perera, I. R., Daeneke, T., Makuta, S., Tachibana, Y., Jasieniak, J. J., Mishra, A., Bäuerle, P., Spiccia, L., & Bach, U. (2016). Indium tin oxide as a semiconductor material in efficient p-type dye-sensitized solar cells. NPG Asia Materials, 8(9), e305. https://doi.org/10.1038/am.2016.89
Brinker, Russel C. (1994). Elementary Surveying, Harper and Row. United State of America.
Dan, S., Kimia, K., Tipis, L., Sn, S., Dengan, P., & Evaporasi, T. (n.d.). STRUKTUR DAN KOMPOSISI KIMIA LAPISAN TIPIS Sn(S. 1–8.
Fang, Z. F. ; Liu, Z. L. ; Dai, J. J. ; Qian, H. Y. ; Qi, Z. L. ; Ma, L. B. ; Peng, J., 2009. Effects of enzyme addition on the nutritive value of broiler diets containing hulled or dehulled Chinese double-low rapeseed meals. J. Anim. Physiol. Anim. Nutr., 93 (4): 467-476
Isherwood, P. J. M., Butler, K. T., Walsh, A., & Walls, J. M. (2015). A tunable amorphous p-type ternary oxide system: The highly mismatched alloy of copper tin oxide. Journal of Applied Physics, 118(10). https://doi.org/10.1063/1.4929752.
Kasuma Warda Ningsih, S., Kalmar Nizar, U., Bahrizal, B., Nasra, E., & Fatimah Mutiara R, S. (2021). Sintesis Mg2+ doped ZnO dengan penambahan albumen ayam ras menggunakan gabungan metode sol-gel dan sonokimia. Jurnal Riset Kimia, 12(1), 27–35. https://doi.org/10.25077/jrk.v12i1.374
Kasuma Warda Ningsih, S., Nasra, E., Yanna Rahayu Jurusan Kimia, dan, Matematika dan Ilmu Pengetahuan Alam, F., Negeri Padang Jl Hamka, U., & Tawar, A. (2020). Indonesian Journal of Chemical Science Sintesis dan Karakterisasi Nanopartikel Co 2+ doped ZnO dengan Menggunakan Metode Sol-Gel. J. Chem. Sci, 9(1), 2–8. http://journal.unnes.ac.id/sju/index.php/ijcs
Kim, B. N., Seo, G. K., Hwang, S. W., Yu, H., Ahn, B., Seo, H., & Cho, I. S. (2018). Photophysical properties and photoelectrochemical performances of sol-gel derived copper stannate (CuSnO3) amorphous semiconductor for solar water splitting application. Ceramics International, 44(2), 1843–1849. https://doi.org/10.1016/j.ceramint.2017.10.119
Liu, T., Du, R. bin, & Kong, X. jun. (2012). Preparation and electrochemical properties of amorphous tin-copper composite oxide CuSnO 3. Advanced Materials Research, 535–537(Cl), 31–35. https://doi.org/10.4028/www.scientific.net/AMR.535-537.31
Marotti, R. E., Giorgi, P., Machado, G., & Dalchiele, E. A. (2006). Crystallite size dependence of band gap energy for electrodeposited ZnO grown at different temperatures. Solar Energy Materials and Solar Cells, 90(15), 2356–2361. https://doi.org/10.1016/j.solmat.2006.03.008
M. Sholeh kosim (2012) , dkk. Buku Ajar Neonatologi. Ikatan Dokter Anak Indonesia. Jakarta
Mohanta, D., Raha, S., Vikram Gupta, S., & Ahmaruzzaman, M. (2019). Bioinspired green synthesis of engineered CuSnO 3 quantum dots: An effective material for superior photocatalytic degradation of Rabeprazole. Materials Letters, 240, 193–196. https://doi.org/10.1016/j.matlet.2018.12.104
Ning, T., Ji, F., Ma, J., Song, Z., Pei, X., & Tan, Y. (2009). Study on fabrication and properties of copper-tin-oxide thin films. Advanced Materials Research, 79–82, 787–790. https://doi.org/10.4028/www.scientific.net/AMR.79-82.787
Surono, A. T., & Sutanto, H. (2014). SIFAT OPTIK Zinc Oxide (ZnO) YANG DIDEPOSISI DI ATAS SUBSTRAT KACA MENGGUNAKAN METODE CHEMICAL SOLUTION DEPOSITION (CSD) DAN APLIKASINYA UNTUK DEGRADASI ZAT WARNA METHYLENE BLUE. Youngster Physics Journal, 2(1), 7–14.
Wang, C. C., & Ying, J. Y. (1999). Sol-gel synthesis and hydrothermal processing of anatase and rutile titania nanocrystals. Chemistry of Materials, 11(11), 3113–3120. https://doi.org/10.1021/cm990180f.
Rahman, D., Sustini, E., & Abdullah, M. (2017). Fabrikasi Transparant Conducting Film Berbahan Dasar Grafit pada Substrat Plastik dengan Proses Mekanik. Jurnal Matematika Dan Sains, 22(1), 33–36. https://doi.org/10.5614/jms.2017.22.1.9
Rizaldi, D. R., Doyan, A., & Susilawati, S. (2021). SINTESIS LAPISAN TIPIS TiO2:(F+In) PADA SUBSTRAT KACA DENGAN METODE SPIN- COATING SEBAGAI BAHAN SEL SURYA. ORBITA: Jurnal Kajian, Inovasi Dan Aplikasi Pendidikan Fisika, 7(1), 219. https://doi.org/10.31764/orbita.v7i1.4655
Shin, H. H., Joung, Y. H., & Kang, S. J. (2009). Influence of the substrate temperature on the optical and electrical properties of Ga-doped ZnO thin films fabricated by pulsed laser deposition. Journal of Materials Science: Materials in Electronics, 20(8), 704–708. https://doi.org/10.1007/s10854-008-9788-9
Salah, M., Murphy, P., Hall, C., Francis, C., Kerr, R., & Fabretto, M. (2019). Pure silicon thin-film anodes for lithium-ion batteries: A review. Journal of Power Sources, 414(November 2018), 48–67. https://doi.org/10.1016/j.jpowsour.2018.12.068.
Suchanek, K., Bartkowiak, A., Perzanowski, M., & Marszałek, M. (2018). From monetite plate to hydroxyapatite nanofibers by monoethanolamine assisted hydrothermal approach.Scientific Reports, 8(1), 1–9. https://doi.org/10.1038/s41598-018-33936-4
Park, S. K., Han, J. I., Kim, W. K., & Kwak, M. G. (2001). Deposition of indium- tin-oxide films on polymer substrates for application in plastic-based flat panel displays. Thin Solid Films, 397(1–2), 49–55. https://doi.org/10.1016/S0040- 6090(01)01489-4
Yu, Z., Perera, I. R., Daeneke, T., Makuta, S., Tachibana, Y., Jasieniak, J. J., Mishra, A., Bäuerle, P., Spiccia, L., & Bach, U. (2016). Indium tin oxide as a semiconductor material in efficient p-type dye-sensitized solar cells. NPG Asia Materials, 8(9), e305. https://doi.org/10.1038/am.2016.89
