Rancang Bangun Alat Fast Charging Baterai Type Swap dengan Fitur Pendingin Design and Implementation of a Fast Charging System for Swappable Batteries with Cooling Feature

Article Sidebar

Page Numbers: 961-973
Download PDF
Published: Aug 1, 2024
Digital Object Identifier: 10.58578/aldyas.v3i3.3530
Save this to:
Save to Mendeley Download RIS

Article Metrics:
Viewed: 307 times
Downloaded: 221 times
Article can trace at:

Author Fee:
Free Publication Fees for Foreign Researchers (USD 0.00)
Check for article on SINTA:

LYAS Publisher cordially invites qualified professionals to serve as Editors or Reviewers. Your expertise will make an important contribution to maintaining and strengthening the academic quality of our publications. Interested applicants are kindly requested to complete the application form at the following link: Editors & Reviewers

Connected Papers:
Connected Papers

Please feel free to contact us if you need any further information about the submission process or if you have any additional questions.

Authors:
Dharma Indi Kusumawardhana1, Bagus Wahyudi2
Copyright :

Authors retain copyright and grant the journal right of first publication.


Main Article Content

Dharma Indi Kusumawardhana
Politeknik Negeri Malang
Bagus Wahyudi
Politeknik Negeri Malang

Abstract

This research aims to design and build a Fast Charging Swap Type Device for electric motorcycles with integrated cooling features. An Arduino MEGA is used as the temperature controller and indicator for the device, while an ESP32 is used as a data logger reader. Additionally, it is hoped that this device can stabilize the temperature and maintain the charging voltage. The research method uses experimentation, which involves testing the battery through this device with varying currents of 12 A, 14 A, and 16 A, comparing the use of the cooling feature at 15 °C and without cooling. The purpose of the testing is to demonstrate the performance of the fast charging swap type device. A data logger is used to monitor the stability of the DC voltage when using the cooling system and without it. The data is then processed into graphs. The collected data is subsequently analyzed using process testing methods and ANOVA testing.

Keywords:
Share Article:

Citation Metrics:

 Scopus



Downloads

Download data is not yet available.

Scopus Citation Data

Data source Crossref
0
citations
Check Secondary Documents in Scopus
Open this article in Scopus, then check the Secondary documents tab. Use Manual Citation Fallback only for counts you have verified manually.
Open in Scopus
Similar Scopus Articles
Scopus
  1. Hwang S. (2027)
    Existence of weak solutions for fast diffusion equation with a drift term and its application
    Nonlinear Analysis Real World Applications, 93
  2. Soleimani M. (2027)
    Ultrafast laser-induced vacancies enabling rapid diffusion sintering in TiO2: Direct atomic-scale observation
    Journal of Materials Science and Technology, 278, 187-196
  3. Xu J. (2027)
    Combinational modulation of few-layered MoSe2 by structure and interlayer engineering for fast-chargeable and durable Na/K-ion batteries
    Journal of Materials Science and Technology, 278, 85-93

Article Details

How to Cite
Kusumawardhana, D. I., & Wahyudi, B. (2024). Rancang Bangun Alat Fast Charging Baterai Type Swap dengan Fitur Pendingin. Al-DYAS, 3(3), 961-973. https://doi.org/10.58578/aldyas.v3i3.3530

Creative Commons License
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

References

Ahsan F, Pratama Dodi, Hidayat Ralang, Prayoga Deny, & Radianto Denny. (2023). RANCANGAN FAST CHARGING UNTUK KENDARAAN LISTRIK DENGAN MENGGUNAKAN ALGORITMA KONTROL TEGANGAN PADA BATERAI. JURNAL FUSION , 3(7), 709–714.
Alwi, E., Putra, D. S., & Khoiri, H. (2017). VEHICLE FUEL SAVING TEST WITH LIMITATION OF ROTATION MACHINES. 47 | VANOS Journal Of Mechanical Engineering Education, 2(1). http://jurnal.untirta.ac.id/index._php/vanos
Ardiansyah, Paserangi, I., & Yusuf Ali, M. (2023). PEMBUATAN CAS CEPAT BATERAI VRLA (VALVE REGULATED LEAD ACID) PADA MOTOR LISTRIK (BYVIN) TEKNIK MESIN UNIFA QUICK CHARGING OF VRLA (VALVE REGULATED LEAD ACID) BATTERY ON ELECTRIC MOTOR (BYVIN) TEKNIK MESIN UNIFA. In Jurnal Aplikasi Teknik dan Sains (JATS) (Vol. 4, Issue 2).
Asti Marina, Supriyadi Imam, & Yusgiantoro Poernomo. (2020). ANALISA PENGGUNAAN SEPEDA MOTOR LISTRIK BAGI TRANSPORTASI ONLINE TERHADAP KETAHANAN ENERGI(STUDI PADA GOJEK). Jurnal Ketahanan Energi, 6(1), 19–38. https://doi.org/10.1016/j.enpol.2017.08.015
Budi Pranata, K., Priyono, M., Sulistyanto, T., Ghufron, M., & Yusmawanto, M. (2019). Pengaruh Variasi Arus Pengisian Pengosongan Muatan pada Model Baterai Lead Acid Terhadap Perubahan Efisiensi Energi. Jurnal Fisika Flux, 16(1). https://doi.org/10.20527/flux.v15i2.5311
Hanes, N. M. (2024). Jurnal INTRO (Informatika dan Teknik Elektro) Analisis Perbandingan Sensor Suhu dan Kelembaban DHT-11 dan AHT-10 dengan Perangkat Lutron AM4205A. In Jurnal INTRO (Vol. 3, Issue 1). https://ejournal.upm.ac.id/index._php/intro
Mamahit Calvin, Ticoh Janne, Sangi Nontje, & Angmalisang Harrychoon. (2022). Studi Sistem Pengisian Cepat Baterai Kendaraan Listrik Berbasis Papan Pengendali OpenEVSE. JURNAL EDUNITRO, 2(1), 61–70.
Nasution, M. (2021). Karakteristik Baterai Sebagai Penyimpan Energi Listrik Secara Spesifik. Journal of Electrical Technology, 6(1), 35–40.
Siburian Jhonson. (2019). KARAKTERISTIK TRANSFORMATOR. In Maret: Vol. VIII (Issue 1).
Sujitha, N., & Krithiga, S. (2017). RES based EV battery charging system: A review. In Renewable and Sustainable Energy Reviews (Vol. 75, pp. 978–988). Elsevier Ltd. https://doi.org/10.1016/j.rser.2016.11.078
Wang, Y. W., Jiang, J. M., Chung, Y. H., Chen, W. C., & Shu, C. M. (2019). Forced-air cooling system for large-scale lithium-ion battery modules during charge and discharge processes. Journal of Thermal Analysis and Calorimetry, 135(5), 2891–2901. https://doi.org/10.1007/s10973-018-7646-4
Wibowo, I., Sudibyo, C., & Basori. (2014). PENGARUH PENGGUNAAN BATTERY LIFE EXTENDER TECHNOLOGY TERHADAP TEMPERATUR CHARGING DAN BERAT ELEKTROLIT PADA YUASA LEAD ACID BATTERY TIPE LIQUID VENTED 12V 5Ah. JIPTEK, 7(1), 54–62

Explore Our Journals
Find the most suitable journal for your research. If this journal does not fully align with the scope of your manuscript, we invite you to explore our wider portfolio of journals covering diverse fields of study. Please select one of the journals below to identify the most appropriate publication platform for your work.